Search results

  1. Lou C

    Pumping out oil from dipstick

    That will work too, but the garden hose adapter allows you to use a larger diameter hose.
  2. Lou C

    installing a remote oil filter set up, got a question....

    Some filters have a bypass valve but some don't. Probably the majority of them do. Since the GM small block V8 as always had the oil filter mounting pad with the adapter & the bypass valve staked in it, you could use a filter without a bypass, and it wouldn't cause a problem if the oil filter...
  3. Lou C

    454 vibrating and breaking starter bolts

    If it was smooth when you got it back think of what could have changed…could there be an engine miss, cracked distributor cap, high tension lead with too much resistance etc. First I’d go thru it like auto shop 101 tune up…The balancer slipping is possible but not super likely…
  4. Lou C

    Pumping out oil from dipstick

    Actually on OMC/Volvo engines the dipstick tube is attached to the bottom of the pan with a banjo bolt style set up. If you use a garden hose adapter on your oil vacuum pump (female fitting; the dipstick tube had a male fitting) it works much better than the small plastic tube down the dipstick...
  5. Lou C

    454 vibrating and breaking starter bolts

    If Merc doesn’t sell it any longer check Summit Racing or Jegs It’s actually a GM part
  6. Lou C

    454 vibrating and breaking starter bolts

    The starter bolts can break if they are the wrong length (too long) and the old direct drive starters usually had a brace on the front to stabilize it. The bolts you use must match whatever starter you are using.
  7. Lou C

    In need of parts (and/or part #’s)…

    Even a small hole will cause those problems; you probably should replace the gimble bearing & maybe the ujoints. I\Os need a lot of regular maintenance… Impeller every 2-3 years depending on use Bellows on these can last as long as 10 years but some don’t due to storage (keeping the drive up...
  8. Lou C

    Need Help Selecting New Trailer Brake Kit/Actuator

    What you could do is add one stainless pair & see how it stops with that; but I’d guess that with a boat that size you’d want to have brakes on both axles. I used to have a 3500 lb axle on my single axle trailer and it was fine for around town towing. I upgraded the axle to a 6,000 lb axle & 12”...
  9. Lou C

    Need Help Selecting New Trailer Brake Kit/Actuator

    Do you need salt water corrosion resistance? If so the way to go is full stainless pricey but you pay once. Even though it says Dexter it is really Tie Down because Dexter bought Tie Down as well as several other trailer parts suppliers. Kodiak or Dee Maxx both make full stainless disc brakes...
  10. Lou C

    installing a remote oil filter set up, got a question....

    Another data point, online I have found a couple of different OEM Mercruiser remote oil filter kits, none of them appears to come with a different by pass valve. https://www.marineengine.com/parts/mercruiser-sterndrive-parts/43l-mpi-alphabravo/0m300000-thru-0m614999/remote-oil-filter Here's one....
  11. Lou C

    installing a remote oil filter set up, got a question....

    I asked MM when I ordered the kit they said they install lots of these on their turn key engines and you don't need to change the bypass. However, you won't know until you install it and run it till the engine warms up and see if the filter gets warm indicating that oil is flowing through it...
  12. Lou C

    installing a remote oil filter set up, got a question....

    I called the guys at Canton Racing who made the mount that goes on the engine, they said you can use either as long as you use it properly. BUT, still worried about the bypass issue. The standard one is an 11 lb bypass, I have heard from a few sources (but Michigan Motorz doesn't agree with...
  13. Lou C

    Hello all, I want to install a remote oil filter mount for my 4.3 V6, is it neccessary to replace the filter mount bypass valve?

    Adding this for any V6 owners who want to add the filter mount. As you can see in this pic, on the smaller 4.3 mounting pad, there is no added bypass housing. That housing would not fit, it would have been a lot easier if they were the same but they aren't. So the only way you are going to...
  14. Lou C

    installing a remote oil filter set up, got a question....

    BTW the price of this kit now is about double what you were quoted!
  15. Lou C

    installing a remote oil filter set up, got a question....

    Yep there are fittings that thread into the mount for the filter & the block mount; those are the ones that get the sealer, the threads on the fittings for the hoses don’t get anything. I like the idea of this but have mixed feelings about it. On the one hand not having to remove half of the...
  16. Lou C

    installing a remote oil filter set up, got a question....

    OK I bought this remote oil filter set up from Michigan Motorz that will work on my 4.3 with Volvo style exhaust. They sent a roll of teflon tape to seal the threads of the connections but I have read not to use teflon tape on oil or gas threads. So then what to use if anything? Permatex thread...
  17. Lou C

    Oil leak - Volvo Penta 5.7

    Also the P/S actuator mounted on the transom mount is known to leak.
  18. Lou C

    Oil leak - Volvo Penta 5.7

    I agree with Scott the most likely source is the adapter that’s bolted to the block, that or the oil lines bolted to it.. A rear main seal would be leaking between the oil pan and the bell housing.
  19. Lou C

    Buying an '03 Sea Ray Sundeck 220

    Another vote for closed cooling. Right now I’m in the process of extending the block drains with 2 lengths of hose so that I don’t have to pull out the rear seats just to drain the motor. They way I’m doing it they are not tied together & can be rodded out if they don’t drain. That & the remote...
  20. Lou C

    Buying an '03 Sea Ray Sundeck 220

    When I had my issue with leaky head gaskets & salt water in the oil I spoke to a few mechanics & both said the same thing water in the oil or even antifreeze will deteriorate bearings & you might not know that there bad till you put a load in it. In my case the water wasn’t in the oil long...
Top