Search results

  1. Bt Doctur

    Alpha one not fully engaging reverse

    1 cable can have no more that 2 threads visible when installed 2 Adjust cable for Fwd and install cotter pin 3Adjust reverse by raising the stud the cable is attached to
  2. Bt Doctur

    Shift Cable Issues= Alpha One Gen1

  3. Bt Doctur

    Shift Cable Issues= Alpha One Gen1

    this is approx neutral, with it facing you ,it is in fwd all the way to your right is reverse
  4. Bt Doctur

    Shift Cable Issues= Alpha One Gen1

    in what direction are you turning the shoe for Fwd?
  5. Bt Doctur

    Overheated now wont shift in forward or reverse

    they may be pieces of the exaust shutter but if the shifter is also jammed you may have melted the shift cable. Got to come out to fix
  6. Bt Doctur

    Shift Cable Issues= Alpha One Gen1

    screw the guide in all the way and tighten the locknut Adjust the slide and the arm with the roller so that the shoe is in a strraight line, have someone hold it like that while you install the slide inside the boat making sure the cable is visable in the small hole in front between the stud...
  7. Bt Doctur

    Fuel pump

    mechanical, bolted to the side of the block. electric, bolted to the front of the motor
  8. Bt Doctur

    Figure this out , I`m confused

    removal was not that difficult even with the breaker bar 1/4 to 1/2 turn and they were free. All agree they were stretched but how much torque do you need to install flywheel bolts in a crankshaft spec is 75-85 and that cant stretch a bolt like that
  9. Bt Doctur

    Figure this out , I`m confused

    This is from a 351C inboard motor . Needed rear main seal replaced and during reassembly this was found. All 6 flywheel bolts are exactly the same. Never seen anything like this .
  10. Bt Doctur

    Mercuiser 3.0 Popped rear core plug

    my question is how you winterized it this past winter. Core plugs are pushed out from freeze damage
  11. Bt Doctur

    Help! 95 5.0 efi ford firing order

    https://roadsumo.com/ford-engine-firing-order/
  12. Bt Doctur

    2018 Mercruiser 6.2 water pump

    google 26-90562, 26-72785 30-72961
  13. Bt Doctur

    poor performance, sluggish, no power above 3000 rpm

    Just to set the stage that was a few of the issues.End of last season customer forgot the fuel fill and we had a heavy rain, guess where it went.Motor started then stopped and would not run. Drained the tank, fuel sep, removed carb and turned it upside down , etc. Got the motor running with a...
  14. Bt Doctur

    The leg is off

    guessing a home made fix to repair a loose steering arm
  15. Bt Doctur

    1986 Mercruiser V-8 5.7L - overheating issue??

    Rule is water in=water out. Shadetree test is to run the engine at idle, feel the hardness of the circ hose. Run at 2500 and feel it again.If now hard as a rock your restricted from manifolds or riser/elbow
  16. Bt Doctur

    Mercruiser alpha 1 gen 2 pressure test issue

    sounds like the oil hose is compromised
  17. Bt Doctur

    I screwed up install of lower shift cable?

    Most of us install the cable completely so that dosent happen and then make the final adjustment. Have someone hold everything in place so the lower shoe is straight. now install the black sleeve and lock the core down, with control box in full fwd, install and adjust cable to fit. test to make...
  18. Bt Doctur

    4.3L Mercruiser Starting Issue

    the computer does everything, you just drop in the dist at the arrow and walk away.
  19. Bt Doctur

    Zero fuel pressure?

    any more that 4-6 psi will cause issues.
  20. Bt Doctur

    Throttle handle removal from older Quicksilver throttle binnacle

    If you shift into full fwd you will see an allen screw in the handel
Top