How about a something similiar to "Read this first" on having the readers post the results of the suggestions supplied.We try to supply the correct answers but would like to know were on the right track with our responses.
Just completed this repair. water leak between manifold and block. the pipe plug in the head (between cyl. 6 and 8 rt side or cyl. 1 and 3 left side)corroded away at the bottom of the plug.there was enough room to drill and retap a 1/4 in plug within the existing plug because the existing plug...
For what its worth on M/C or Cobras, I use a input shaft with the yoke machined off and the shaft undercut where the 2 o rings would go 1/8 th inch undersize.This helps you to see the actual direction on how the motor has to be moved and how far to obtain alignment. using a drill bit or...
After a lot of years working on these boats i finally got one that was run thru sand for about a 1/2 hr.Stbd. manifold and riser plugged solid. not one drop of water passes thru.approx. 8 oz of sand recovered from the hoses.(1/2 of a 12oz coffee cup)My dilemma is whether or not enough sand can...
trying to determine the last year for an early drive.vertical shaft bearing in upper unit held in place with a nut. extremely large driveshaft splines.<br />Ed
EDIT: Sorry Doc. Solicitation to buy or sell is not allowed on the message boards.<br /><br />Try the Classifieds or the Thrifties.<br /><br />Good luck. :)
