Search results

  1. JimS123

    Bolts ?

    Lube the bolts with penetrating oil for awhile so they get some penetration (hopefully). Mask the head to insulate it, then put dry ice on the bolt head. Sometimes it works, sometimes not. I personally use Blue Locktite when I hope to never have to remove the bolt again, and anti-seize if I...
  2. JimS123

    Boat support with rollers and bunks

    A high quality "all roller" trailer will be designed so each roller carries no more than about 125 pounds per roller. I've seen some cheepie trailers that have too few rollers and each one carries as much as 175 pounds. Those are the ones that you see roller damage on the hull. If you have...
  3. JimS123

    Battery Straps?

    Yeah, I have never replaced a battery strap. Every boat I ever had the strap lasted the life of the boat. My last boat was 35 years old with the original strap. Must be sumting wong! Is the battery box out in the open subject to sunlight all the time? Certainly, an un-boxed battery would...
  4. JimS123

    Trailering clips?

    Its like insurance. If you never had an accident, why did you need it? Read your owner's manual. Mercury recommends that they be used. Maybe they know more than we do. When I bought my first I/O I read the manual and then asked the dealer what to do. He didn't know, so I followed the book...
  5. JimS123

    Engine height on Offshore repower.

    When you're on the hard, you have to start somewhere. While above or middle may be viable options, below is not a good idea, especially with a setback.
  6. JimS123

    Engine height on Offshore repower.

    There is no "standard". Every boat needs to be optimized by collecting data at different heights with trial runs. Just for reference, my 2 boats were set up by the manufacturer with the following specs: 16" setback - AV plate 4" above keel No setback - AV plate 2" above keel I am assuming that...
  7. JimS123

    Bass tracker tournament tx 17 1988

    Bass Tracker is still in business. Go to their store and ask them for replacement parts. Or, go online at Basstracker.
  8. JimS123

    Outboard Painting

    I have factory painted props that are many years old and still have all the paint left. I have props that I have painted 10 years ago and have not lost paint yet (maybe only in the water 30 or 40 times, though). I have other props that I wasn't too careful with, and have paint loss on the tips...
  9. JimS123

    Refinishing mohogany swim deck - what should I use?

    That's odd. I'd like to see a picture as well. If you varnish the teak (yeah it can be done) you won't be happy. If you teak oil the mahogany, I don't know what it would look like cause I never tried it.
  10. JimS123

    Outboard Painting

    I have tried all the non-toxic stuff. Even used the envirofriendly mineral spirits. Threw them all away after 1 use. I use the old version of Zip Strip.
  11. JimS123

    Refinishing mohogany swim deck - what should I use?

    Is it mahogany or teak? I never saw a combination. Better find out what it is. Mahogany sanded smooth would require a mahogany stain from your manufacturer of choice. Then topcoat with 3 coats of Captain's Varnish (marine spar). If its teak, 3 coats of Amazon Teak Oil. (that's the brand...
  12. JimS123

    Hosclaw trailer question....spindle washer....?

    Lots of nostalgia here. Your trailer looks just like my very first boat trailer. In my 53 years of boat ownership I can only recall one trailer that had a washer under the castle nut. Maybe you don't need one.
  13. JimS123

    Console cover for boat with T-Top

    If the boat s 3 or 4 years old, contact Wellcraft. If it is older, custom may be your only option. There is a company that makes everything for Boston Whalers, regardless of age. Try googling Wellcraft OEM parts and maybe someone specializes in them as well.
  14. JimS123

    Outboard Painting

    I'll second that about prep work. If you have original paint you won't need to etch prime that. The bare spots will need it, though. The issue is the feathering. I have not been too successful in that regard. Any time I tried I always saw a hump after it was painted. I never sand a prop...
  15. JimS123

    Ted Williams 5.5 hp no sparks

    My translation is that because the motor has no spark he is asking what part is bad. OK, I'll bite. Magneto, (coil, points, condenser), spark plug wire and spark plug. Or, power pack. Test each part and replace as necessary.
  16. JimS123

    Tiller Conversions Seahorse 35

    Laingsoutboards.com I didn't specifically google your motor, but if he doesn't have new parts, nobody will.
  17. JimS123

    Open Bow Boat Sleeping ideas

    We had a bow rider and we used to camp all the time. The boat had B-T-B seats that folded down. It had what they used to call "Camper Canvas". The Bimini (actually convertible top) in the front, with a second top behind it. With side curtains and an aft curtain the cockpit was totally...
  18. JimS123

    Leaving I/O in water all year round?

    Looking at your box of junk parts its obvious we are talking apples and tomato cans here. As I previously said, "A complete OD service". Your job did not cover the entire spectrum, hence the difference in cost. In any event, if you're happy, that's all that matters. ("must of" ?)
  19. JimS123

    Trailer for Stingray 250CS

    Physically measure the OAL, beam and get the weight from the manufacturer's catalog. Add fuel, water and stuff to get the total, then add 10%. With the data in hand, go to the dealer you would like to buy it from and pick out the model that fits your requirements. A 25' boat needs a 25'...
  20. JimS123

    Tahoe T16. Will it fit in my garage?

    I swear, 75% of the questions here can be gleaned with a 5 second google. According to tahoe's web site, under specifications, the specs for a T16 is: Storage Length 21' 5'' Storage Length W/Optional Swing-Away Tongue 19' By the way, the "standard" 2-car garage size in the olden...
Top