Search results

  1. Scott Danforth

    New guy, floor repair questions

    ^× 1000000 He is right. A simple hull restoration is about $4000 with today's prices ,(no motor or interior)
  2. Scott Danforth

    I have a 1986 Bayliner Capri with a 4 cyl volvo engine with a volvo Penta 270 outdrive.

    Raw water pump is on front of motor. Replace the impeller and the raw water inlet fitting along with all the other maintenance the prior owner didn't do You are running on muffs, correct? And not trying to suck up from bucket
  3. Scott Danforth

    Triax Marine Gear Oil

    Amsoil is my preferred gear oil in VP drives
  4. Scott Danforth

    projects other than boats

    Using my hotrodders thread, then linking back https://www.hotrodders.com/threads/1952-fiat-topolino-belvedere-project.550685/?post_id=4853322&nested_view=1&sortby=oldest#post-4853322 Have 4 other forums I could use as well.....LOL
  5. Scott Danforth

    Wiped cam lobe mechanical fuel pump

    The R terminal was used for points ignition. It's common with later motors to not have anything wired to it
  6. Scott Danforth

    projects other than boats

    Just a little water. Mill Creek now 3' above the road Not sure I'm still on the road. Fording 2 feet of water .
  7. Scott Danforth

    Wiped cam lobe mechanical fuel pump

    Yes, The R terminal provides power during cranking Then after cranking, the oil pressure switch provides power unless the motor dies and oil pressure goes away. Then it kills power to the fuel pump meeting the requirements for shutting off fuel I currently run both ignition power and fuel...
  8. Scott Danforth

    projects other than boats

    maybe this will work
  9. Scott Danforth

    projects other than boats

    so...... trying to figure out how to get home as all the major roads around my subdivision are closed due to flooding would post pics..... however......
  10. Scott Danforth

    Going from 25 hp to 35 hp

    I would look at your boat or the motor I can plane my 14' fishing barge with 2 people and 12hp gale.
  11. Scott Danforth

    Aq271 Tacho issues

    line 2 in post #2 called that out
  12. Scott Danforth

    Aq271 Tacho issues

    No, however is the tach set to 8 cylinders?
  13. Scott Danforth

    Prop size?

    because of this statement, I would leave the prop where it is
  14. Scott Danforth

    daily music fix

  15. Scott Danforth

    Transom ski hook to ski rope

    yep. Note, that hook is only rated to pull a skier ( 400# rating), not a tube (2400# rating)
  16. Scott Danforth

    Wiped cam lobe mechanical fuel pump

    Relay coil is not voltage direction sensitive.
  17. Scott Danforth

    Wiped cam lobe mechanical fuel pump

    No, that is the crank signal yo the S terminal. You want to wire to the R terminal
  18. Scott Danforth

    Cobra outdrive

    Pull the drive. That should be done annually
  19. Scott Danforth

    Wiped cam lobe mechanical fuel pump

    The terminals on both the relay and the switch should be labeled Oil pressure gauges go to a gauge sender Pics don't currently work
  20. Scott Danforth

    Stuck In Gear

    Shift interrupt switch not working. Most likely need a new lower shift cable
Top