Search results

  1. 9

    Aren't my ignition coils defective?

    I would get some Peak voltage readings for all the inputs and outputs of the CDIs to make sure they read at least the minimum listed in your service manual. you mentioned that you made sure all pugs on Port motor had spark using a spark tester. to me that means they were sparking. what about...
  2. 9

    Yamaha 115 (2003) leaking water

    pull the cowling off and see where the water is coming from
  3. 9

    Yamaha 130 fuel connector

    running a multi cylinder, multi carb motor dry cannot work very well. yes the motor will die, but there will be fuel left in the bowls, some will have more than the others. As it evaporates it will leave residue. and the Cylinders that run low 1st will lack lube as the others keep the motor...
  4. 9

    2000 Yamaha F100 four stroke oil alarm goes off at first and then goes away

    from what I have read, the alarm is an out of normal range of pressure for the RPM at that time. could be too low or too high. I would tee in a gauge to see what the pressure is doing when it alarms and when it goes away
  5. 9

    Help with Engine ID / prop

    So, you refusing to give us info from your motor or to look at the web site we recommended is running you off from this or another forum. you have got to be losing your mind. sorry to see you go, but you do what you want like you have
  6. 9

    Help with Engine ID / prop

    why is it so hard to take recommendations and look for yourself. we look up the info for our equipment, but we do not have the need to look up yours. maybe you will learn some new things in the process, so you do not have to rely on others next time you need that type of info
  7. 9

    Help with Engine ID / prop

    look up Yamaha Performance Bulletins to find a boat like yours or close. and see what prop they used
  8. 9

    2003 Yamaha F25 Runaway Throttle on Start

    I would not think it should be a 27 while idling, only at WOT. but I know very little about those 4 stroke motors since I never owned one or worked on one. It just does not make sense to why it would be that advanced at idle
  9. 9

    Yamaha key switch mount horizontal

    grind the plat so the switch will fit in the position you want. you can always use some 5200 to hold it from turning
  10. 9

    2003 Yamaha F25 Runaway Throttle on Start

    I am confused about you setting the advance to 10 and 27. is this something on the timing light or the motor? My Snap-On timing light from back in the 70s does not have anything to set, just hook up and read what is shows on the motor.
  11. 9

    2003 Yamaha F25 Runaway Throttle on Start

    I am of no help, I do not see anything either in that manual on the timing. But I did notice at the end it is for a 1999 F25X Whatever that means. did you ever check to see if the throttle plates in carbs close all the way when you back off the throttle?
  12. 9

    2003 Yamaha F25 Runaway Throttle on Start

    My C40TLRX (2 stroke) has a linkage from the throttle linkage to a wiper on the CDI. this tells the CDI what position the throttle is in the CDI also has inputs telling the motor when the motor has warmed up or overheated. the CDI somehow changes the timing electronically using the inputs. I...
  13. 9

    2003 Yamaha F25 Runaway Throttle on Start

    I was talking about the timing when the spark plus fire. a timing light shows how many degrees before or after top dead center the plugs get spark. you are looking at the timing of the cam shaft and crank shaft. but you need to read your service manual to find the proper way to verify that...
  14. 9

    2003 Yamaha F25 Runaway Throttle on Start

    And over reving a motor without a load is a good way to screw things up
  15. 9

    2003 Yamaha F25 Runaway Throttle on Start

    throttle plates should be closed in neutral, does not mean they are. you have to check if they are closed like they should be or open for some odd reason. linkage came off, or stuck linkage throttle plates maybe. Not sure what controls the timing on that motor, but a timing light will tell...
  16. 9

    2003 Yamaha F25 Runaway Throttle on Start

    motor needs more fuel and air to rev up or timing has to be advanced. if the throttle plates are still closed off, I would be checking to see what the timing is doing with a timing light
  17. 9

    2023 Yamaha 9.9 high thrust compression reading

    with that much scoring in that cylinder wall might indicate oil coming up past the rings fouling that one plug. did the other cylinder wall and piston look OK?
  18. 9

    2023 Yamaha 9.9 high thrust compression reading

    Since I cannot find a parts diagram for a 2023 motor, I am guessing it is like the 2022 so it has carbs with a choke. I do not understand how a 4 stroke motor would be carboning up so bad from just gas and no automatic enrichment system to fail and be dumping extra fuel into the motor when not...
  19. 9

    2023 Yamaha 9.9 high thrust compression reading

    a complete model number would be good to post when asking about a motor. Being a 2023 I believe it has to be a 4 stroke motor. what does the oil look like, and the level? being new, was it broken in properly. some motors not broken in properly dilute the oil with fuel and cause it to over fill...
  20. 9

    Yamaha 130 mounting height

    is it the same poster? If it is maybe altimers got a hold of him and does not remember asking/going thru this not long ago Yep just checked his posts and found this. https://forums.iboats.com/threads/yamaha-130-hp-20-shaft-mounting-height.770983/
View older results
Top