Search results

  1. C

    Water pump

    utube is your friend .....
  2. C

    Evinrude 9.9 Overheating

    better than 200 if ok look further for water restriction OEM and Sierra show it as a 143 thermostat but 153 is probably fine but a bit hot
  3. C

    Evinrude 9.9 Overheating

    recheck thermostat operation and retest watr flow....<200 is to hot ! thermostats open at 140 run a mono line up the pee hole good to hear psi's went back up to 115
  4. C

    Evinrude 9.9 Overheating

    fix the water flow issue something needs fixing... then just run it... my 9.5 9622a runs fine with 65-70- psi it is 30 years old and may simply keep going . all depends on what you want if for.
  5. C

    Johnson sea horse

    nice little troller TN or TD post model # TN27 have standard magneto...easy to fix up if compression is OK I have a similar one in the shed model TN27 http://pochefamily.org/outboard/ why not fix it up ! DO NOT JUNK IT !!!
  6. C

    1999 115hp evinrude ficht

    no offense but you need to progress in steps to ensure proper fuel flow to get your PSI up to specs btw unable to open your atachement ... temp sensor must be ok no EMM faults tank pick-up not clogged ? tank hose is good to engine lift pump ? lift pump surface filter screen ok ...
  7. C

    1999 115hp evinrude ficht

    here are links to ficht up to 70 ...for some base info you can download and print https://drive.google.com/file/d/1RL4u9XPQxTEk6lVk-fPcXxd3O9ctuXL3/view?usp=share_link and ....next is a link to 2002 and up ETEC FICHT for added info...
  8. C

    1999 115hp evinrude ficht

    filter #7 is a VST return line filter .... nothing to do with the HP pump base screen filter if your version of the HP pump does not have an inlet filter at the bottom and the pump seems blocked or won't spin enough by applying 12v & grd directly to it then run some light oil in it...
  9. C

    1999 115hp evinrude ficht

    if anything like ETECs you have filter you can see on the side but.... have you checked the VST return line filter per picture above.... and below . https://www.etecownersgroup.com/post/dirty-filter-photo-reference-11967737?highlight=hp%20filter
  10. C

    1998 Evinrude 15 hp electric start

    it is only complicated when you don't know. :-) glad the video helped.
  11. C

    1998 Evinrude 15 hp electric start

    see minute 5:00 may help
  12. C

    1999 115hp evinrude ficht

    I enjoy this hobby and just try to help out best I can while I learn as much as I can, not having spent my life in a outboard shop :-) other than my shed ! Had a few crow pies but it is part of learning. I hope landshark gets his 115hp FICHT going. I am trying to get a copy of the 115hp...
  13. C

    1999 115hp evinrude ficht

    not having the specs on the 1999 5psi seems....very low. the book on 70hp says minimum 34 psi so the 155hp should certainly have more than 5psi ... to pressurize try a few key on 3-4 and test fuel pressure. the lift pump can be simulated by hand pumping I doubt it is the issue...
  14. C

    1999 115hp evinrude ficht

    Oly'S brew is adding TCW3 oil at 200/1 mix in the fuel
  15. C

    1999 115hp evinrude ficht

    if you are talking DVA adapter you can build one your self for a few $ or search google. all it is is a AC rectifier/storage circuit to allow AC peaks to me measured as DC volts...
  16. C

    1999 115hp evinrude ficht

    The FICHT 2002 manual I have access to says 40v as the running voltage and on ETEC it was boosted to 55 v running 30 v key on. looks like your key on to running ratio is similar to more recent FICHT & ETEC Quite possible the 1999 version ran at lower volts . In any...
  17. C

    Checking Pts without Removing Flywheel CD-18

    as a member of AOMCI you would have download access to the Johnson 400 page + service manual which covers your oldy extensively. that is where that above page comes from :) that book is a bible for oldies maintenance carbs, ignition ph gc etc....
  18. C

    Checking Pts without Removing Flywheel CD-18

    just adjustt the points to a max of .020 at the highest point of openning but.... if never done you should pull the FW inspect for cracked coils possibly replace condensers etc... caraefull with the carbon seal under the PH... very delicate
  19. C

    Do you make your own gaskets ?

    can't see why not .. no heat or much pressure in the carb. but carb kits come with them and not verry $$$$
  20. C

    1999 115hp evinrude ficht

    https://www.etecownersgroup.com/post/hp-fuel-pump-screen-9654752?highlight=high%20pressure%20pump%20screen
Top