Search results

  1. flashback

    Courtesy lights to LED. Dropped the wires for one light.

    Might try a piece of hose taped to a shop vac. Might work
  2. flashback

    Time to reassemble

    Thanks to both for the info. I will get some #3. I don't wrench enough to keep the stuff around, it always goes bad by the time I need it again. The last project I had was rebuilding an antique clock movement and all I needed for that was some good oil and a lot of patience. LOL I've come to...
  3. flashback

    Time to reassemble

    LOL! Well now that we have that sorted out, what's a good substitute for merc's perfect seal for the threads on the shift cable. seems like teflon tape would work on that, and I have plenty of it laying around.
  4. flashback

    Time to reassemble

    Dis -assembly went easy, I just cut every thing made of rubber and thru it away. one of the hinge pins on the ring was hand tight and the other not much better so that was a surprise. anyway I got my new parts and just need to do a bit of cleaning and I am ready to put things back.. Got a...
  5. flashback

    Engine coupler woes

    Thankfully a false alarm, I have a hunting friend who loaned me his bore scope and I have plenty of splines and they all have flat tops. The gimbal bearing was so trashed that paranoia set in. I have some high pressure moly graph grease which I use on my lift gear which seems like a good choice...
  6. flashback

    Varnishing an oak swim platform - need advice please

    Nothin lasts forever,, glad it worked out.
  7. flashback

    Engine coupler woes

    Thanks for the photo, I didn't know the splines didn't run the entire length, It gives me hope that it still may have splines in it. Like I said in my previous post once I got the engine running I was able to get the boat to the ramp but I didn't push it...
  8. flashback

    Engine coupler woes

    I was afraid that would be the case. 20 years ago I swapped out the motor in my 79 chris craft and you were there in spirit... back then I had a place to work and I rented a cherry picker to pull the engine. but just not sure I am up to that these days. I need to study it a bit more. I actually...
  9. flashback

    Engine coupler woes

    I removed the gimbal housing today and got a bit deeper, I can't find any splines on the coupler. This boat is becoming more and more discouraging. I suspect I know the answer but just thought I would ask. Can a coupler be swapped while the engine is in the boat? I don't have the equipment or...
  10. flashback

    fuel pump frustration

    just a PS nextel, If I have helped you I'm happy but please understand that I am experimenting, my project is ongoing. I have no idea of how what I'm doing will hold up. I'm in the process of getting the rubber parts in the transom assembly replaced along with the bearing and I have only done...
  11. flashback

    fuel pump frustration

    yep, my pump bracket is mounted to the bracket on the manifold that the filter was originally mounted to, I had to drill a couple of extra holes in the pump bracket which I mounted up side down for ease. then I mounted the filter to the bulkhead just above the gas tank. Tried to keep things as...
  12. flashback

    Varnishing an oak swim platform - need advice please

    No expert but I have varnished a lot of trim on my sailboat back when I was a masochist and you need several more coats with a light sanding in-between each. What you've done looks good, it just needs more.. like alldodge said, red oak will keep you busy.
  13. flashback

    ignition switch source for fuel pump relay kit?

    Wiring needs all the help it can get. LOL.
  14. flashback

    ignition switch source for fuel pump relay kit?

    And nola mike, your spot on, once my head understood what needed to happen the 3 pole oil switch gave options. The relay may overheat so that is on the watch list.
  15. flashback

    Wire rope replacement

    I installed the cables and the 2x4s worked great but remember it's a one way street, no backing up.
  16. flashback

    ignition switch source for fuel pump relay kit?

    Yep that's how I did it. There is a fuse link right behind the relay that you cant see for power. Wanted to keep my wiring short as i could and convenient access in case.
  17. flashback

    ignition switch source for fuel pump relay kit?

    I just did that mod on my 5.7 and used a lead off the ignition coil because it was close to where I mounted the relay..
  18. flashback

    The leg is off

    I found an online no. 14 manual on the internet and read up a bit on the changes from the pre alpha drive. I'll need to get the tool to remove the gimbal housing, I also dug up my old alignment tool but not sure if it will work on the alpha one. As always any advice or tips are gratefully taken.
  19. flashback

    Figure this out , I`m confused

    and a darned accurate burp gun. I would have thought the bolts would have snapped..
  20. flashback

    The leg is off

    Tinkered a bit between rain drops and disconnected the lower cable from shift plate so it was free at both ends. About all I can compare it to is the throttle on a lawnmower. It has some resistance but not real heavy. I had to take the set screw out of the slide with vice grips, there was no...
View older results
Top