Search results

  1. 9

    2006 Yamaha F150 wont turn off

    my guess would be the 10 pin harness between the motor and controller since those 2 things should not be related to one wire
  2. 9

    Did leakdown test, will a new head gasket help?

    only if the head gasket is leaking. when you test one or both of those cylinders with air pressure on it can you hear air coming out of the other cylinders spark plug hole? or coming out of around the head anywhere? how about coming out of the intake or exhaust? I thought Leak down tests...
  3. 9

    2008 90TRL need more power!

    I would look up some Performance bulletins for your hull with a 90TLR to see what prop was used and figure out what pitch that prop you have is
  4. 9

    BAD CDI? 2002 ox66 saltwater series 2 200hp

    if the rail pressure is not in spec, the motor willnot be getting the proper fuel under a load. check to make sure what the rail pressure is
  5. 9

    BAD CDI? 2002 ox66 saltwater series 2 200hp

    does the rail pressure stay in spec when the problem is happening? have you had the injectors cleaned and tested?
  6. 9

    BAD CDI? 2002 ox66 saltwater series 2 200hp

    a motor can rev up with no load fine, but it needs more fuel to run properly under load. I would still be working on you fuel problem
  7. 9

    1995 Yamaha 130 oil injection lroblem

    sometimes it is a simple thing, and easy to find after you look everywhere else
  8. 9

    LF225XCA Trim Piston Binding

    OK I get it now, you were talking about the down movement when tilt trasitioned to trim. I was thinking in the up movement. that was my fault
  9. 9

    2008 90TRL need more power!

    there is no such thing as a 90TRL. is it a F90 TLR or maybe a 90TLR did this motor ever push this boat at normal speeds and RPM?
  10. 9

    LF225XCA Trim Piston Binding

    good to hear you figured it out, and thanks for coming back to say what the problem was. that was not something anyone would normally see. you had me confused about what you were calling trim and tilt when you said " trim piston binds immediately engaging in trim after tilt." trim is the small...
  11. 9

    No Start

    does one of the stickers have a manufacture date on it? is it a 2 sroke or 4 stroke? is it an oil injected motor?
  12. 9

    No Start

    does not say much about the motor. you have a model #? how many yamaha 90s are there?
  13. 9

    No Start

    should be a 7 or10 pin harness from the motor to the controller that contains all wiring needed to run the motor, but you are the olny one that knows what motor you have
  14. 9

    No Start

    as I said check to see where you have 12V+ under the different positions of the key switch. you have not proved you have voltage to the key switch yet, much less anywhere else
  15. 9

    No Start

    check to see if the key switch is getting 12V+ to it on a red wire. see if the brown wire gets 12V+ on it when key is turned to start position, then see if the controller is in neutral
  16. 9

    2003 Yamaha 115 2 Stoke doesn’t turn over by key switch

    neutral safety switch in controller, will keep motor from turning over is it thinks it is not in neutral
  17. 9

    1995 Yamaha 130 oil injection lroblem

    since the tank is full and the switch is closed that indicates the switch is not what is causing your problem. if you drain the remote tank and the switch opens , that will mean the switch works as it should. something else is not letting the system know the tank is full. open wire/bad...
  18. 9

    2007 Yamaha F50TLR - Lower Unit Stuck

    ball joint/tie rod fork will not work, nothing for it to pry against. you are the one that convinced him it was the shift shaft, even tho he did not have one like yours. so you can now convince him that is not his problem
  19. 9

    2007 Yamaha F50TLR - Lower Unit Stuck

    if he really feels the SS is the problem cut it, it is a small cost to replace compared to the drive shaft being cut and replaced. at least I was not telling him to undue the nut on his SS that does not exist.
  20. 9

    2007 Yamaha F50TLR - Lower Unit Stuck

    As I said how do you know the shift shaft is his problem?
Top