Search results

  1. D

    Need help: Bizarre Bravo III freshwater galvanic corrosion quandry

    I have also checked continuity between the bonding wires and there is minimal resistance (minus the paint in certain areas and surface corrosion). The real question is why are the magnesium anodes not working? Here are some more pictures:
  2. D

    Need help: Bizarre Bravo III freshwater galvanic corrosion quandry

    Something very odd is going on with my boat and its 7.4L/Bravo III setup that I do not understand at all. It has only started happening upon boating in the Great Lakes and plugging in at Michigan municipal (hot?!) marinas. Here is some backstory: Soul Rebel became a freshwater boat in 2023...
  3. D

    Flat tire on haul-out today . . .

    This is the answer.
  4. D

    1995 Chaparral 2550 SX Refit and Restoration

    Thank you for the kind words! Cheers, Drew
  5. D

    1995 Chaparral 2550 SX Refit and Restoration

    Con't: Another small project I did last year was to replace the warped aluminum piano hinge on the deck storage hatch with a proper robust stainless one: Further, here are pictures of the (completed) rehabbed cushion: Here is the other cockpit speakers (had to be mounted in...
  6. D

    1995 Chaparral 2550 SX Refit and Restoration

    Another project I did in the last year, was replacing the woeful 6.5" Kenwood speakers that I installed back in 2020, with some 6"x9" three-way ones from Polk; I also replaced the Kenwood stereo with a Fusion RA-70 and the results have been fantastic!: we can finally hear music over the engine...
  7. D

    1995 Chaparral 2550 SX Refit and Restoration

    Cushion project (need to get a picture of the finished product, but it looks great!):
  8. D

    1995 Chaparral 2550 SX Refit and Restoration

    Before the trip, I had done some gelcoat repairs on the engine box (since I had leftover gelcoat in the factory color from Spectrum), but unfortunately on our shakedown cruise a seat cushion with damaged trim and shoddy rusty staples gouged the fresh repairs. Thus I decided do design and...
  9. D

    1995 Chaparral 2550 SX Refit and Restoration

    Time for an update: We have finished the hull/deck joint, rubrail, gelcoat, and a myriad of other miscellaneous repairs. Soul Rebel has now splashed three times--for three different trips--in 2025. The first time was a short day hop with family, then a longer, ~35 NM crossing from Manistique...
  10. D

    Alpha 1 gen 2 bellows service

    I have done that once lol! I was able to replace it without removing the engine but it was a *****! I was like 21 or 22 at the time and was made of rubber.
  11. D

    Alpha 1 gen 2 bellows service

    In my experience, the OEM ones last for at least 15-20 years if stored properly. My 30 year old boat is on its second set that were replaced in 2018.
  12. D

    replacing transom, has anyone used AL square tube instead of wood?

    It can last practically forever if one properly seals all edges and drilled holes with epoxy! Contrary to iboats opinion, boats don't just rot with great care but from misuse and abuse.
  13. D

    1995 Chaparral 2550 SX Refit and Restoration

    I will update this thread with some more of last year's projects and stuff that I was recently working on, when I get back up there in a few weeks time. Did some resealing and rubrail repairs, added a new Fusion stereo system with some nice 6x9 speakers, etc. Nonetheless, I think we are going a...
  14. D

    1996 wave venture 1100

    Use a drum siphon.
  15. D

    Time for Riser & Manifold > VP or Barr?

    Barr and Osco= OEM equivalent casting.
  16. D

    Volvo Penta 7.4 Gi

    VP sucks unless you like overpriced special tools to do basically anything including removing the props which you must do to do basic drive service on many mid-DP models.
  17. D

    2003 Yamaha HDPI No Start/Sputter Has Spark

    You act like those things can be easily tested without YDS. Everything that could have been tested with standard equipment has been tested, including pump pressure at the VST tank which is erratic and momentarily goes to 50 with the key "on" before cranking when it goes to zero. If you want to...
  18. D

    6.2 MPI Whine noise when revs

    Sounds like the upper, gimbal, or u-joints. Remove the drive as a start.
  19. D

    2003 Yamaha HDPI No Start/Sputter Has Spark

    I agree. I do not have YDS though or a computer with a disk drive to run it. I'm pretty sure it's the ECU. I have learned from an engineer friend, that the ECU controls the VST fuel pump negative side so a simple test while cranking when I am back at the boat should confirm if the pump is losing...
  20. D

    2003 Yamaha HDPI No Start/Sputter Has Spark

    Gee, thanks for the useless advice. You do realize many things have been tested in sequence, right? -There is compression -There is spark -The lift pumps work -The VST fuel pump is new and runs when the key is "on," but loses voltage while cranking -The fuses have all been checked and are fine...
Top