Search results

  1. Scott06

    Stainless Steele or NO..

    Pfopbably not worth the money. Are you looking to correct any performance issues besides the fact that its a pontoon boat?
  2. Scott06

    Tahoe q7i prop

    Try an enertia they aren’t cheap but generally hear good results on them.good balance between acceleration and top end, good bite when trimmed out.
  3. Scott06

    Blessing in disguise

    You may have to step up in Prop pitch I’d run it and see. I swapped a 4.3 for a 5.0 and kept the steeper 6 cyl drive ratio went from 19” to 21” pitch and it works perfectly for the valve seal and piston and ring questions I’d talk with your machinist who will be doing the work on this. new head...
  4. Scott06

    5.7 Venturi Cluster

    ok now I see what you mean. I don’t have a mercarb handy but does seem really odd.if you can’t find one there are a number of YouTube vids rebuilding these carbs or call a carb shop like mikes carb parts and ask. I would not Think you would want to solder it shut as it looks unmolsted , you...
  5. Scott06

    5.7 Venturi Cluster

    Which carb did you buy specifically from whom, I think Sierra does make a merc a knock off that is new, likely other sources are remanufactured carbs that may have a mix of parts if some one made a mistake during rebuild
  6. Scott06

    No Spark

    Also check man overboard switch should be red toggle switch on throttle control. This cuts off power to ignition circuit
  7. Scott06

    1997 5.7 Gi fuel system

    in addition to Lou s comments about cold starts - its seems like your engine had fuel injection on it, then someone hit a roadblock parts or maintenance wise and swapped out for a carb? Must have been problematic enough to tear it out? i have a1409 on my mercruiser 5.0 that works very well...
  8. Scott06

    19' to 21' Bowriders or Sport Decks

    I’ve been very happy with the two Sea Rays I’ve owned over the last 25 years- 1991 170, and a 2004 200 sport. 21 is a good size for that lake And uses you outline. Look at the SPX 21. personally I prefer IO ,despite the advantages of a modern 4 stroke ,solely for the a clean swim platform on the...
  9. Scott06

    Changing Gear Ratio...Prop Change Required

    Yes try the 21” check wot rpms. You may over rev so back off the throttle when you get to 4600. going to steeper gearing will improve ( all other things being the same) holeshot and will limit top end, hence going up in pitch to compensate. Five years ago i swapped a 5.0 for the original 4.3 in...
  10. Scott06

    Hull stringer material

    That weekender is much different in terms of construction than my ‘04 200 sport. Not the best photo of stringers as I was just getting done repose rings , but the stringers and floor are smooth and shiny just like the hull. I think this model and hull design was released in 04.
  11. Scott06

    Hull stringer material

    True wood was main material used for stringers transom and deck material for many years, often nothing more than plywood tabbed in. Around the early 2000s manufacturers started to transition to more modern materials. I suspect driven partially by ways to reduce assembly labor. If you compare how...
  12. Scott06

    Hull stringer material

    My 2004 Sea Ray does not have wood stringers I believe they are composite and ‘glued’ to the fiberglass hull look around the engine mounting points there will be 1” plugs in the side of the stringer for putting foam under the floor you can easily pull one out and see the stringer construction...
  13. Scott06

    MC1 Gimbal with Alpha Gen 1

    Alpha gen one will fit a mc1 transom assembly so that is a common maintenance swap out over the years. Im not sure if they swap put if you google mercruiser 32582 you’ll find some used steering pins. your best bet if you can find a rotten boat sitting in someone’s yard is to get a complete...
  14. Scott06

    Vortec or not?

    O this won’t work . I’m assuming since you mention 4 bbl set up you are looking at swapping the intake and carb onto your 99 2 bbl engine? No the intake will not fit your later vortex heads, as outlined count the intake bolts.
  15. Scott06

    Size and pitch for prop

    Start with a 19” pitch 3 blade aluminum black max type . see where your wot rpms land adjust pitch up or down from there.
  16. Scott06

    Bravo 1 anode kit

    I use the magnesium kit from boat zincs on my alpha in fresh just was well works fine
  17. Scott06

    Mercruiser 3.0 135hp. Crank and rods

    sage advice. Keep it to 9.0 or 9.5 to 1 and you can live on 87 octane. You may be able to mill the dome off the aftermarket pistons. Your machinist would know the options
  18. Scott06

    Single point drain tech tip

    That’s why I had kids, my 15 years old is learning how to do it. I was about 13-14 when I started working on my grandfathers boat.... teach me to work on a boat I can waste a lifetime....
  19. Scott06

    Oil change could be easier...

    Yep I use the same best money I ever spent used it both through the dipstick tube and off the drain hose connected to the pan. Pump it go chug a beer come back and it’s done
  20. Scott06

    1994 Mercruiser 3.0 high idle off plane

    What gasket was used between the intake and the carb. I ran into a sI I,at issue on my 1990 3.0. It had a single hole in the intake but yet had a two hole gasket below the carb. When doing a routine carb rebuild , the kit came with two gaskets a two hole and one with an oval hole that more...
View older results
Top