Search results

  1. R

    8hp Evinrude running poorly.

    I usually test stuff and rarely install parts by the guessing method.----When I see the score marks like in your video, the motor comes apart for inspection.-----No hesitation on that.-----I hope to pick up a 1994 long shaft model 8 HP for less than 1/2 of what you have invested.---Not run for...
  2. R

    1995 BW Rage14 115 Jet

    Step #1 would be to remove some panels to get room to work on it.
  3. R

    8hp Evinrude running poorly.

    Nothing goes wrong with these carburetors that would warrant a complete replacement.----No demand therefor no one is going to set up to make these !!!
  4. R

    Heating Johnson

    ???----And what are the " diverter valves " and what do these diverters actually do ?
  5. R

    Transom Corner Caps

    I would make replacements using fiberglass.
  6. R

    OMC ECM Needed

    One of the issues with modern electronic stuff.-----Nobody want to fix / support these items or make after market replacements !!------Old equipment that needs a bit of attention now and then is sometimes better.
  7. R

    Medically dependent on electricity?

    You would think that some of these medical appliances / systems ( not all of course ) could have a manual back up.------Let one of kids the operate the crank as needed.
  8. R

    Chrysler 75 horsepower seems to lack a lot of power at wot

    How did you pressure test the 3 crankcases ???
  9. R

    1977 Johnson 35hp neutral cut out switch question.

    ???-----These only have ONE WIRE.-----They only need 1 wire.------The ground is internal.-----I have cleaned the internal parts.-----Easy to take apart and clean.
  10. R

    1996 115hp Johnson OB losing 1500 rpm after 2 minutes of running WOT

    How did it run last season ?----There are 2 different 115 HP models in 1996.----Need a model for further input.
  11. R

    Chrysler 25hp coils

    If there is a wire from solenoid to one terminal on a coil it is likely a coil with internal resistor.----Measure voltage at the coil with ignition turned to " on " and that will tell you the story.
  12. R

    1989 Force 85 HP Starter Disengages

    Should be easy to take the nut off then.
  13. R

    3.5hp 4 stroke Mariner. Stalling when accelerating from idle

    It is adjustable.----Remove cap of low speed mixture screw.-----Open 1/4 turn.----Test run.
  14. R

    1989 Force 85 HP Starter Disengages

    Is there a hex on the bottom of the bendix / drive ?
  15. R

    2000 Johnson 2cyl 50 missing bolt help!

    Post #2 is correct !!
  16. R

    Chrysler 25hp coils

    Is there a wire from solenoid going to the coils ???-----Amazon has coils for $20 or so.----Install some and test run.
  17. R

    1992 Evinrude 140 misfire

    Check the flywheel key first.----Then post your compression numbers.----Then see if spark jumps a gap of 3/8" or more on each lead.
  18. R

    Which Witch Is This

    Circa 1937.----Or just use ---google----Lots of pictures and information.---Have 2 witches myself.
  19. R

    97 Mercury XR6 alarm problems

    Tested the buzzer itself ??
  20. R

    2000 Johnson 2cyl 50 missing bolt help!

    edited
Top