Search results

  1. tswiczko

    Ohio River Trip

    I am trying to plan a trip down the Ohio river from Louisville to points south, but I am having trouble locating fuel depots. Can anyone help me with a websit or publication that has a current list of open marinas with and contact information to get costs of slips and hours of opereation so I...
  2. tswiczko

    Thank You New Albany Boat Club

    Thankyou to the New Albany boat club of New Albany Indiana for letting me use a slip and getting me information on locking through at McAlpine locks. And the lockmasters at McAlpine locks in Louisville Ky. You men and women are a very courteous and professional group of people.
  3. tswiczko

    loading trouble

    when I pull my boat off the trailer the bow eye hangs up on the front roller and is difficult to get above the roller when loading. I've lowered the front roller and moved the winch post toward the rear to maintain boat position on the trailer and not get too much tongue weight but can not go...
  4. tswiczko

    thinking of new prop

    I apologise for not reading more on props before posting but I have an 1989 mach1 (mv2450)magnum 270 hp mercruiser. alpha one 1:50 and 14.25x22 3 blade prop. It is a dog out of the hole but runs 42 knotts (not mph) gps WOT about 4400 rpm. I was offered a 5 blade 21 pitch of same diameter at a...
  5. tswiczko

    alpha first gen trim position

    drive goes up and down. Does not stop on own limits started looking and found cracked and broken wires on trim position switches. can these be by-passed and run by manually stopping or am I going to be spending a lot more money on parts.(1989 alpha 1 gen one 350 magnum 270 hp.)I know for...
  6. tswiczko

    Naming My Boat

    I bought my boat used and there was no name on it but it looks like the previous owner removed something off the transom but I can't make out what it said (starts with s and ends in y)so I would like to do a ceremony and name it but not sure of a name yet Wife wants me to name it AN AFFAIR so...
  7. tswiczko

    Deck and Stringers

    I'm back to pick your brains. I have an 89 Mach-1 Magnum MV2450 that desperately needed a deck. I've several of the threads before starting and learned that I should probably check the stringers too. After I removed what was once wood, I drilled into the top of what appeared to be a stringer...
  8. tswiczko

    alpha one gen1 drive 1988

    I recently bought an old Mach 1 and done some maint to get it on the water. The first few times on the water were ok but I started to get a vibration in the floor and can reduce the vibration by triming the out drive but is still there. I removed the magnetic plug to find fine metal shavings and...
  9. tswiczko

    Mach1 Magnum MV2450

    I recently bought a Mach 1 with a 350 merc. magnum 270 Hp looking for owner manual 1988
View older results
Top