Search results

  1. W

    TX heat will push unvented gas cans gas past valves.

    TX heat will push unvented gas cans gas past valves. 3 gallons in a 2nd tank was gone today with all indications it was pushed passed the coupling and out the bilge drain while in storage. jow
  2. W

    Later results of an over torqued cylinder head?

    What are the later results of an over torqued cylinder head? Warping or stripping later vs then?? A friend borrowed a torque wrench to re-torque his head after having questions about the fist wrench. I showed him that I always check my Sears Micro wrench with my Ward?s Pointer type wrench...
  3. W

    What is Quicksilver Dri-Fuel's shelf life approximately?

    What is Quicksilver Dri-Fuel's shelf life approximately? Will Dri-Fuel serve the purpose of StaBil? Can or should both be used in the same fuel? I?m ready to treat a 6-gal batch of fresh fuel. I?m finding what I know is fresh StaBil and Dri Fuel over a year old. I only burn 6-12 gallons of...
  4. W

    Will Major Auto Stores carry Quality Outboard fuel line?

    Will Major Auto Stores carry Quality Outboard fuel line? My 1970, 35HP Chrysler needs about 6?, primer bulb and in-line filter. Thanks for any tips! jow
  5. W

    Site's New Look

    After being gone a few weeks, is this the Site's New Look? JOW
  6. W

    I feel North TX humidity help weaken my 1968 15? Raycraft Boat's floor

    I feel North TX humidity help weaken my floor due to adding a window to monitor for water. With the window open for weeks knowing the floor was soft the wood never dried. When I siliconed a clear Lexan window inside the seat?s pedestal floor area, it fogged initially and later cleared some. My...
  7. W

    Maxxie's Drain Plug Pics

    Is the drain plug showing in Maxxie Pics? OR! Is just his description as to where it is? I c/n reply to the post. Is it showing just above the skeg?? Take Care! JOW
  8. W

    Maxxie's Drain Plug Pics

    Is the drain plug showing in Maxxie Pics? OR! Is just his description as to where it is? I c/n reply to the post. Take Care! JOW
  9. W

    Checking For Water In Boat Floor?s Windows X Water Logged!

    Checking For Water In Boat Floor?s Windows X Water Logged! Under the center and rear seat's stands were areas of concern or to compare. A problem since 1985 w/o patters or reasons, except after winter storage or heavy rain (1969 14 or 15' Raycraft). It's still a question as to when but recent...
  10. W

    A Solid TellTale Stream Without Exhaust!

    A Solid TellTale Stream Without Exhaust! I had to see what the telltale project was like. This was an easy project and will have ?A Great Advantage?! I?m really sold on the solid stream w/o exhaust mixed-in or showing. The previous owner of the 55 HP cover (on this 1970, 35 HP Chrysler)...
  11. W

    1996 Evinrude 9.9 HP 2 cycle, 2 cylinder no spark

    I have a 1996 Evinrude 9.9 HP 2 cycle, 2 cylinder outboard which has a weak or no spark at the spark plugs. From what I can see on the engine and some parts lists it appears it has a "coil" in addition to the magneto spark energy from the flywheel (assumption, I have not pulled the...
  12. W

    Who has the over heating alarm wiring diagram?

    Who has the over heating alarm wiring diagram (that was on here almost 2 weeks ago)? Thought I saved it? It was for maybe a 45 HP Chrysler. Would most be the same? Thanks! JOW
  13. W

    I found some of my 1970?s Magneto System Diagnostic Equipment & Stuff.

    I found some of my 1970?s Magneto System Diagnostic Equipment & Stuff. About a month ago there were questions related to coil and condenser tester and today I found some of the ?Old Stuff?. It worked back then and I?m sure it works well now. It?s more interesting now but my 70, 35 HP...
  14. W

    Would a 1969 14? Raycraft?s stringer design be similar

    Would a 1969 14? Raycraft?s stringer design be similar to this design attached? Stringers in both directions enclosed in fiberglass. I have a soft spot I need to address but I?m curious as what to expect. I can feel hard stringers close to the soft spot but I wonder if they are enclosed with...
  15. W

    Please share Pictures and Info on repairing Older Raycraft Boat?s floors and transoms

    Please share Pictures and Info on repairing Older Raycraft Boat?s floors and transoms. It's time to make some decisions on my 14?, 1969, Raycraft that I purchased in 1985 as my starter. It proved to be all I needed for my 5-8 short fishing trips yearly and will possibly finish my needs. 1...
  16. W

    Is it normal for condensation to cause damaging water under a floor?

    Can condensation cause damaging water under a floor? At the start of this season about 3 month ago I drained about 2 gallons of water from under the floor. I would have pulled the plug earlier or possibly left it out if I had known water was developing. Now, after 18 hours of fishing, I have...
  17. W

    Please explain differences in correct/incorrect Chrysler 35/55 series, "Frank mention

    Please explain differences in correct/incorrect Chrysler 35/55 series, "Frank mention Please explain differences in correct/incorrect Chrysler 35/55 series, "Frank mentioned?.
  18. W

    Chrysler/Force Pros, Please give your opinion on a residue matter with a 15 HP Force.

    Chrysler/Force Pros, Please give your opinion on a residue matter with a 15 HP Force. This matter is above my experience. Thank You In Advance! This post is still on page 1 from trucker28. The past link w/n getting you there. "1990 force 15HP milky resadue problem (Pics need help...
  19. W

    Is a Percentage Leakage Test recommended to diagnose combustion components of O/B eng

    Is a Percentage Leakage Test recommended to diagnose combustion components of O/B engines? Such as, in the 1970s we used a Sun Engine Analyzer with a Percentage Leakage Gauge on it. With the engine in the compression mode (just before TDC, valves closed, etc.) we added compressed air and the...
  20. W

    How can I use the model #, seral # to determined the year model of my 1971, 35 HP Chr

    How can I use the model #, seral # to determined the year model of my 1971, 35 HP Chrysler motor ( Mod. = 3555, Ser. =2365)? It?s titled as a 1971 but I have been told it could be 1972-73. It has not mattered due to the few parts I have used worked for the range of years. Thanks In Advance, JOW
Top