Search results

  1. W

    1974/75 30 hp Chrysler water pump

    Are you testing in a full 55 gal drum? This makes a difference on my 1970 35 HP (not a 55 as the cover). Stored 2” higher on jack stands caused no water and it cane instantly with the drum on 2X4s. A side note is that I learned to route my Tell Tale out put to the fixed base vs getting...
  2. W

    1969 55 hp Chrysler wont start

    In the neutral shifting position, the button on the black neutral switch (attached) should be compressed to crank. If you are cranking and have fire, IMO this is not a neutral switch issue. With good Fire/Fuel/Compression it should run. We are missing something if it ran before the L/U...
  3. W

    25hp chrysler ignition

    You have some good Norden and Frank Questions. They will probably Jump in later or you might need to add Hello Norden and Frank to your title. Meanwhile you are getting some good info related to my 1970 35hp Chrysler that has a mag sys that does not need a battery in the sys to start and run...
  4. W

    Installed a tell tale today on my 35hp

    See the attachments of my Tell Tale if I can get this challenge to work.
  5. W

    Is my old Dell Pen4, 2.8 GHz, 2 gig of ram too slow for the new upgrade?

    Is my old Dell Pen4, 2.8 GHz, 2 gig of ram too slow for the new upgrade? Or! Is it just slower and erratic due to the bugs that are being worked out?
  6. W

    Please share a link or tips on adding attachments on this upgrade

    Please share a link or tips on adding attachments on this upgrade. Plus, it appears not to like cutting and pasting text. Is that correct and a disadvantage or danger? Thanks!
  7. W

    Is my 1970 Chrysler 35 hp bone dry from last season?

    Is my 1970 Chrysler 35 hp bone dry from last season? Initially I stored Bone dry before I learned about Stabil about 10 years ago. I started leaving Stabil treated fuel in the sys w/o any problems the next season. The water is so low in our North Tx area we made 3 painful trips last season and...
  8. W

    Do all compression gauges screw in the same depth without piston damage?

    Do all compression gauges screw in the same depth without piston damage? I feel I had a Sun Kit in the 70s that had adapters that would go different depths. The dia might have been the key of fitting the correct one. I always matched compression gauge threads with plug's threads.
  9. W

    Is a 70 35 hp Chrysler?s Leg dropped enough on transom saver to be drained/winterize

    Is a 1970 35 hp Chrysler?s Leg dropped enough on a transom saver to be drained winterized (attached)? There were no signs of L/U water invasion or oil leaks at the start of the 5 short fishing trip seasons. 1. I?ll ck L/U for water again since the motor and boat has been so nice to me since...
  10. W

    Tilt Lock Parts Search 1974 chrysler 120 hp #2

    Hello Nordin & Others, Do you have a parts diagram link to, ?Tilt Lock Parts Search 1974 chrysler 120 hp?. Posted today. Can the frozen Tilt/Lock Pin/Rod be driven or drilled out w/o any danger to Al Casting/Housing?
  11. W

    basic small engine ignition systems info

    I ran upon some basic small engine ignition systems info at this address below. POINTS AND CONDENSER | smallengineinformation.com It gives a general overview on: MAGNETO SERVICE REPLACING THE POINTS SETTING THE POINT GAP ADJUSTING THE MAGNETO AIR GAP TRIGGER SWITCHING DEVICES THE MAGNETO...
  12. W

    Check your 6 Gal gas tanks Bone Dry and you might be surprised at the water

    Check your 6 Gal gas tanks Bone Dry and you might be surprised at the water on the bottom. Pour the last quart of fuel into a clear plastic or glass container, to easily see the water on the bottom. This was in fresh fuel I mixed at the start of this summer treated with Stabil. I try and burn...
  13. W

    Thanks Frank!

    Thanks Frank! Thanks for all you share about the Old Chryslers + Motors from your personal experiences...
  14. W

    Should gas tanks be stored in North Tx 100 degree heat with vents open or closed

    Should gas tanks be stored in North Tx 100 degree heat with vents open or closed (under a tarp)? A 6 gal metal tank got my attention releasing pressure today as I opened it. Thinking I?m done until the heat passes I closed the vent. Plus, with the Stabil I have not had problems with 1 yr old...
  15. W

    What damage will reverse battery connections cause to a magneto system?

    What damage will reverse battery connections cause to a magneto system (non charging system, 1970 35 hp Chrysler)? 1. Non that I can see at this point. It started and ran w/o a problem that I could tell yesterday. 2. I went out to troubleshoot why the fish-finder that would not work yesterday...
  16. W

    What Are Advantages/Disadvantages to Chrysler?s L/U Stump Stabbers

    What Are Advantages/Disadvantages to Chrysler?s L/U Stump Stabbers as I hear them called? During the recent North, TX drought I am dealing with many stumps which means very low trolling to drifting is my means of moving. With fishermen that know lakes, I?ll move up to a higher troll but today...
  17. W

    Is testing a coil with an ohmmeter proven to be worthwhile for basic info vs factory

    Is testing a coil with an ohmmeter proven to be worthwhile for basic info vs factory specs? I found this info during a search. Plus, I know real coil tester will make good coils produce fire. How to Test the Coil With an Ohmmeter How to Test the Coil With an Ohmmeter | eHow Reading at the...
  18. W

    Please share late 60s - 70s pictures/links of Raycraft boat?s hull construction from

    Please share late 60s - 70s pictures/links of Raycraft boat?s hull construction from restoring ETC. 1. One fellow said the hull and stringers, Etc was strong enough that he fished off a 2X12 in a donated boat with a bad floor. 2. I would think that is against the law with the flotation removed...
  19. W

    1968 Raycraft 15? hull repair concerns, as to being sealed from water under the floor

    1968 Raycraft 15? hull repair concerns, as to being sealed from water under the floor. 1. I have damage in the center of the hull from a frozen roller, concrete ramp or rocky shores. 2. Is the bottom of the hull sealed fairly thick just above the bottom surface? 3. The bottom?s damage was...
  20. W

    Need info on replacing a spool steering cable

    Need info on "replacing a spool steering cable" (diagram, youtub, link, etc. Thanks!
Top