Search results

  1. P

    Another Bravo 3 shift issue

    Just noticed. Don’t be confused with the replies from this user name. I forgot I had it and opened a new account. So Pursuit2460 is me also.
  2. P

    Another Bravo 3 shift issue

    I couldn’t sleep yesterday to I kept searching and reading. I came across a poor man’s fix for clutch not engaging, which was roughing up the clutch surface with 80 sandpaper. Then I also came across the new gear set that came out in 05 I believe, mines is OL which is actually older than the...
  3. P

    Another Bravo 3 shift issue

    Done and done. Both cables are new.
  4. P

    Another Bravo 3 shift issue

    The one coming from the throttle, no. Tomorrow, but I don't see that making that big of a difference. The new cable going to the outdrive, no, didn't have to. I used the old barrel piece from the old cable. It was pinned from the factory so no adjustment is need on the one. I was also told the...
  5. P

    Another Bravo 3 shift issue

    New to me 2000 Pursuit 2460 w/Mercruiser 5.7 TBI Bravo 3. Had hard shift since I bought it 2 months ago. I removed lower unit and upper unit so I could replace all the seals since I didn't know the last time it was done. Ordered all the o-rings, new shift cable & bellow, anodes and Mercury Gear...
  6. P

    Lowrance Elite 12 ti2 issue

    It was just the rattle. I did have it installed and it worked as far as turning on and messing with it some. Never got to go out on the water to test.
  7. P

    Lowrance Elite 12 ti2 issue

    Yes it worked. Did you see the video? That’s why it needed to be repaired.
  8. P

    Lowrance Elite 12 ti2 issue

    I got it all squared away. Found a number for Lowrance and was able to talk to someone from the company. It’s getting replaced with a new unit. I also noticed the Navico buyout. They own a lot of companies.
  9. P

    Lowrance Elite 12 ti2 issue

    I am a tad bit pissed off right now. Story. Bought brand new Lowrance. Took out of box. Why looking at it and flipping it all around I hear a clunk-clunk noise inside. Verify nothing on the outside or screen is loose. Call Lowrance. Get a case number and off for repair it goes under warranty. I...
  10. P

    Pursuit 2270 Kodiak

    I am looking to purchase a Pursuit 2270 Kodiak. I have tried looking for pics of this model boat and have come up with very few. Also the boat Im looking at has a bimmini top and I would like to see what one looks like with a half top. And what are the opinions out there on this boat. Thanks
  11. P

    Yamaha engine

    I am currentlly looking at a 1995 Pursuit. I have seen the boat in person yet but from the pic all I can tell is thats a yamaha and I see a V-X on top of the couling. Anyone can tell me something about this engine. Thanks
  12. P

    Pursuit-Grady White-Robalo

    I am looking to buy a used 22-25 WA. I am considering the 3 above boats. Any pros and cons would be appeciated. Also the ride in any of this are they wet or dry boat and the quality of the way theywhere built. Thanks
  13. P

    Installation of washdown pump

    I am about to install a washdown pump on my boat. My question is what size the water pick up should be. I know I have to install a valve inline of the water pick up but dont know what size to start with 1" -1 1/4- 1 1/2. After that I know I have to reduce to 3/4 to tie into the pump. Also what...
  14. P

    Charging problem

    I have a 93 johnson 225. Recently I replaced the stator, reg/rec., power pack, trigger base and magnets. I had to put a wire from the batt. to the purple wire on the rec.reg. because the tach and charging would come off and on. yesterday I went out on the boat and I was noticing that I was...
  15. P

    repowering question

    I have a 88 21' Answer CC. I dont know the exact weight but Im pretty sure its up past the 2000 since its old and this boats where made thick. Its and old Florida Marine Patrol boat. Anyways it now has a 93 225 johnson and it a gas guzzler. If anybody is fanilliar with miami i took it out to...
  16. P

    Charging and Timming questions

    I want to start off by thanking Rick on his advice about the location of the primmer buld it made all the diff. in the world. Ok, I have a 93 john. 225. I took it out to day to do some fishing while at the ramp I did the timming. This were the results, with the boat on the trailer and in the...
  17. P

    fuel problem

    I have a 93 john 225. I have replaced the fuel pump non-vro, carb fuel lines, water seperator filter, primer bulb, and fuel line going to the engine. When i have it hooked up on the muffs the primmer bulb gets soft. I did a search and found that reeves said the primmer bulb should be between the...
  18. P

    Faria temp. gauges

    I just bought 2 Faria temp. gauges to replace the other ones that I had. Question is is their a specific temp. sending unit that has to go with it or will the oem ones work. And also does anyone know the thread size for the temp. sensor. Thanks
  19. P

    Faria temp. gauges

    I just bought 2 Faria temp. gauges to replace the other ones that I had. Question is is their a specific temp. sending unit that has to go with it or will the oem ones work. And also does anyone know the thread size for the temp. sensor. Thanks
  20. P

    Tach and purple wire

    I have read alot of the previous thread on the purple wire issue. I have a 93 johnson 225. I replace the stator, power pack, timmer base, and rec/reg. Today I went to turn on the engine and started just fine. Couple of mins. later I look at my tach and its at zero. Turn off the engine turn it...
Top