Search results

  1. JASinIL2006

    What are your opinions on this boat?

    With a non-running engine, it's really a crap shoot, isn't it. The problem could be an ignition control module, or there could be much worse problems lurking. Who knows? Assume the worse case scenario: you'd have to replace/rebuild the motor (and hope the outdrive is OK). Would the boat be...
  2. JASinIL2006

    Towing with/without Overdrive

    Most folks with Ecoboosts - especially the 3.5L - love them for towing. What didn't you like?
  3. JASinIL2006

    Electric Boats

    Same as with cars - but more so with boats - it seems that electric is not quite ready for prime time. But prime time is coming, about that I have little doubt.
  4. JASinIL2006

    Where can i find a curved window

    A friend of mine had a local glass shop fit a sheet of Lexan on a Rinker that had a broken curved windshield. It doesn't look quite as good as glass, and it won't hold up as well, but he'll be able to replace it about 10 times before he comes close to the cost of a glass replacement.
  5. JASinIL2006

    Cold air intake

    Even my ‘05 F150 had a cold air intake, One engineered by Ford to work with my engine. Most of those aftermarket cold air intakes actually draw engine air from the engine bay, where it is anything but cold…
  6. JASinIL2006

    Adding ski pole or tower etc.

    We pull tubes off the transom eyes all the time. it’s the strongest place that you can attach tow line to. Pulling a tube from a ski pole or pylon is a good way to tear the thing out of the boat when the tube submarines.
  7. JASinIL2006

    Bow stop vs bow roller

    Installing one of these helps, too. https://www.gator-guards.com/products/bowshield-bow-guard
  8. JASinIL2006

    Boat Ramp Disaster

    I’m not sure if that occurrence (or videos of same) are all that rare… unfortunately.
  9. JASinIL2006

    First time boat owner with questions about 1998 Starcraft 1810 LX

    No. That is stupid advice. Don’t fill your boat with water. All it will do is get things wet that should not be wet. It will not replicate the pressure of the water pushing in somewhere from outside the hull and intruding into your boat. Do not do anything that person says, ever again.
  10. JASinIL2006

    '85 Sierra 16.5' Fiberglass - Floor / Transom / New Layout

    Looks like you're on your way! Hard to know why that plywood is dark... could be some sort of coating, could just be aged wood. Hard to tell from a picture. Good luck pulling the engine and working on the transom. I'd probably want to get that weight out of there, since you've removed some of...
  11. JASinIL2006

    Good Idea or Bad Idea. Stringer Prep.

    Good luck with your project. Sounds like working on a boat will be good for you. I hope it is.
  12. JASinIL2006

    First time boat owner with questions about 1998 Starcraft 1810 LX

    Although replacing manifolds and changing fluids and other sorts of maintenance need to be done, it seems to me the #1 concern should be figuring out why you have so much water in your boat. If you discover a serious problem (e.g., a rotten transom), all those other become somewhat moot until...
  13. JASinIL2006

    First time boat owner with questions about 1998 Starcraft 1810 LX

    We tube a lot, and even with wet riders and swimmers coming in to the boat, I don't think we've ever had enough water collect in the bilge to activate the pump. When I pull the plug at the end of the day, I might have a steady stream of water for 10-15 seconds, before it dwindles to a trickle...
  14. JASinIL2006

    Resin Cracks

    I’d be inclined to put a layer of plain old CSM down if you think it’s too rough. That would give the 1708 an even better surface to bond to. Faring with PB or whatever is just making more work for yourself.
  15. JASinIL2006

    Restoring 1988 sea ray seville v135 open bow outboard

    Those are pretty good questions and you really ought to start by reading the stickies as Scott suggested. For grinding (eg., grinding off the tabbing that held the stringers, or the tabbing between the edge of the deck and the hull), you really only need to grind until the surface is flat and...
  16. JASinIL2006

    Stones

    Just heard the news on the car radio. Sad day for Stones fans... RIP Charlie.
  17. JASinIL2006

    Good Idea or Bad Idea. Stringer Prep.

    Isn’t epoxy the gold standard? Why would you want to treat wood with Old Timer’s Formula before applying epoxy? I don’t get it…
  18. JASinIL2006

    Best Way to Lay Resin on CSM?

    When I had trouble with those bubbles, it was usually because I didn't wet the surface thoroughly before laying down the CSM. Especially over bare wood.
  19. JASinIL2006

    Charging deep cycle battery off engine?

    I don't think there is any reason you couldn't do that... an ACR does essentially the same thing when the starting battery is fully charged.
  20. JASinIL2006

    Would Smart Tabs help with the pounding?

    I don't think SmartTabs will help with the slamming. They will help your bow drop more quickly and they will help you stay on plane at slower speeds, but I don't think the slamming would be affected. My boat does that, and I have SmartTabs. I think that's more a function of the hull design than...
Top