Search results

  1. F

    Johnson 60 water in cylinder . need assistance

    hi, As stated in title , am in the middle of helping a mate with his 60 vro 1990 bj60elesm and after firing it up it stalled , and on further inspection there was a water leak under the cowling. When i removed the bottom plug water flowed out!! This is new ground for me so a. why is the water...
  2. F

    help reqired as starter wont spin

    I have been trying to repair a Johnson 60 elesm 1990 , it doesn't have a pullstart so I think i've ruined the starter when trying to get engine to crank , to test for compression etc. It was working , then the bendix didn't engage twice and then nothing. I removed the starter , opened, cleaned...
  3. F

    Flywheel won't budge Help!!

    Mariner 30 hp year 2000 Have flywheel held and removed nut but can't get flywheel to come off, am about 5 mins from pulling out the grinder or sledge hammer...:D I don't have access to pnuematic tools so can't use air rachet... please help this is going on for 2 days now, i just can get it...
  4. F

    prop info req for 60 hp johnson

    hi, I'm currently working on a 60 hp johnson (bj60elesm) and the prop needs to be changed as the current one is damaged. It is currently running an aluminium 13 3/4 x 15 . the boat the engine will be used on will be a 13ft speedboat, which will only have usually 1-2 people plus 15 litres of...
  5. F

    carb pic/ diagram of johnson 60hp needed please

    Hi, can someone help me out here, a motor i'm working on (johnson 60 hp 1990 bj60elesm) has had the carbs robbed (starter also but thats life) from it and i'm a bit stuck on how the fuel lines connect up and how the solenoid primer connects up. I have looked at the manual but can't find...
  6. F

    Overheated outboard query...

    hi, I am looking at buying an 225 hp v6 for a ridiculous price because the engine overheated. The current owner was told that it will cost to much to repair it so he'd be better selling it for parts. My question is ... can all overheated engines be repaired ? if so what are the worst case...
  7. F

    drive shaft not turning straight

    hi, helping a mate chabge the impeller in his 1990 johnson 60hp and i noticed that the shaft doesn't turn straight. Is it bent ?? and if so is there any solution or is it a case of throw it away and buy another one??
  8. F

    30hp mariner wiring burnt

    Hi, long time viewer first time poster. My Mariner 30hp (2000 is the year )stopped the other day and upon closer inspection I found that most of the wiring in it had burnt/melted on it. Why?? i presume it was a short? as it was running for about an hour when this happened. Also, how hard is...
View older results
Top