Search results

  1. H

    Started tearing down 30hp

    or 35hp depending on what numbers I believe. AML35D millitary motor. Took the head off and the water passages have redish stuff..probably salt too as there is some white-ish crud in there. What do you use to clean the water passages? The cylinders had some dark spots that look like smudges and I...
  2. H

    97 Mariner 25hp..fuel pump??

    I just rebuilt the carb and fuel pump on my 97 mariner 25hp #OG 490-408, manual start tiller. When I put the pump back together as shown in the Clymer manual with a gasket/pump body/gasket/diaphram...fuel came out of the outside gasket when I pumped the bulb. I took that gasket off and put it...
  3. H

    90-95 tiller throttle cable

    30/35hp Johnson pumpjet with tiller. The threaded adjustment tube on my throttle cable broke.Can you get just that tube, or do I need to drop 60 bucks on a whole new cable? Thanks.
  4. H

    25 mariner parts

    I have a 1997 25 hp Mariner serial# 06490408 that I want to get a carb kit and impeller kit for..my problem...I look at the parts dealers and it has different parts listed for the same year...how do I know what to get? Thanks
  5. H

    Detent balls

    Well..I think I am ready to put my lower unit back together. I lost the detent balls for the clutch dog and took the prop shaft to the hardware to see if they had some ball bearings to fit. The 1/4" were too big and the 3/16 look pretty small, are the factory balls in between these sizes? The...
  6. H

    Bearing carrier threads

    I picked up a used lower unit for my Navy seal motor to see if it changed performance over the pumpjet lower. I was trying to take it apart to check the gears and innards.I pulled the 1/4-20bolt through thethreads on one side andwas wondering what size I had to drill and tap the smooth hole that...
  7. H

    30 Horse power head removal

    I think the gasket between my powerhead and exaust housing may be bad..seems like a lot of smoke comes from that area and two holes just above the lower pivot. It's a 90's tiller manual start Navy Seal motor. What all do I have to disconnect to change the gasket? The manual shows taking off the...
  8. H

    Kill switch...

    The kill switch doesn't work on my millitary bast**d motor. Looking in the two expensive manuals I have purchased so far, it looks to be wired wrong. Both wires lead to the power pack and the manuals show one as being grounded to the block with the other going either to the power pack or...
  9. H

    What is knob for?

    I have either a 92-94 30 hp or 95-96 35 hp 2 stroke, 2 cyl Johnson. On the lower front there is a primer knob and a knob off to the right that goes into an aluminium solonoid type thing with about 5 hoses coming out of it..it's hard to pull the knob out and doesn't seem to make a difference on...
  10. H

    Military Johnson 35hp

    I have been trying to locate a manual for my new used motor, I have found a CD for sale with the 40 hp in it..would this be the same basic motor?
  11. H

    Can't find info, 30 johnson

    I just bought what is supposed to be a 30 hp Johnson with a "rescue jet" lower unit. I can't find any info from the numbers on the engine. The tag has this info;<br /><br />mod...AML35 D<br />NSN...8H2B05-01-267-5047<br />serial...G03186557<br />Contr....N00104-92-c-J068<br /><br />I bought a...
View older results
Top