Search results

  1. flyingscott

    1983 25 hp XD Merc

    Put up a pic of the carb and linkages on the side of the motor. What color are your stripes?
  2. flyingscott

    SPARK PLUG CROSS THREAD

    how does a Heli coil not?
  3. flyingscott

    WME carburetor gasket kit help needed.

    if te needle seat is removable 1 goes there
  4. flyingscott

    1983 25 hp XD Merc

    The screw racer is talking about is # 16 that is the low speed mix. the one I pointed out is Idle speed.
  5. flyingscott

    1983 25 hp XD Merc

    #34 it is literally called a headless screw. It Has a slot in it to adjust
  6. flyingscott

    1970 20hp johnson Ran Hot

    they can if you can find the parts for them
  7. flyingscott

    1983 25 hp XD Merc

    the small screw with no head
  8. flyingscott

    1983 25 hp XD Merc

    Nothing special about an XD. Need serial # and is this a tiller or remote model
  9. flyingscott

    Mariner 90, Lost spark

    Have you checked the ignition switch?
  10. flyingscott

    1954 10 hp johnson carb issue

    Check the Reed valves
  11. flyingscott

    '00 Mercury 90hp, oil injection still works, time to replace it with premix or replace worn parts?

    I agree the 3 and 4 cylinder rarely fail. the V6s that's a different issue. I have a 75 and 90 hp I am rebuilding and they will get their oil injection put back on.
  12. flyingscott

    9.9hp water in crankcase oil

    That's a 4 strk thing it actually has a name, it's called making oil. If the thermostat is bad the motor runs cold and produces condensate, which then ends up in the oil.
  13. flyingscott

    9.9hp water in crankcase oil

    Bad thermostat
  14. flyingscott

    '00 Mercury 90hp, oil injection still works, time to replace it with premix or replace worn parts?

    Seriously? The plastic drive gear is prone to failure on the V6s. Especially after an overheat.
  15. flyingscott

    1966 Johnson 20hp won’t idle and makes a stutter sound

    that looks like a miss either carb or electrical. run a timing light on it
  16. flyingscott

    2003 Johnson 90hp fuel pump

    When VROs go bad they tend to over oil the motor. Go premix or take the pump apart.
  17. flyingscott

    94 28hp SPL Johnson

    Normal. No cover or air box on those
  18. flyingscott

    Have you had any dealings with the Yamaha website ? "https://yamaha2strokeoutboards.com/"

    buyer beware
  19. flyingscott

    1976 Johnson 9.9 won’t “rev” when in the lake.

    Thats the wrong ignition system. OP has the low tension magneto with external coils
  20. flyingscott

    Impeller replaced

    Are you sure the pee hole is not connected to the thermostats? Some models of Merc Require the thermostats to open to pee. Also on muffs should take far less than 90 seconds to bleed out the air.
Top