Search results

  1. C

    Steering cable stuck?

    Spray the steering rod and wipe it off until it is clean. If someone banged on the end of the steering rod, it could be mushroomed. That would need filing or sanding to get it small enough to pass thru the tube.
  2. C

    Why does gearcase have threads and bolts?

    There are threads in the gearcase housing, exactly where Mercury puts theirs, to hold the bearing carrier nut. I was not able to find a bearing carrier puller that uses those threads. All of them that I found had hooks for the bearing carrier plus the center bolt to push on the propshaft.
  3. C

    Mercury 115 2 stroke won’t idle and runs rough.

    A real clean spark plug can be a sign of water infiltration into the cylinder. Did you tell us the year of this motor? Is it a 2+2 motor?
  4. C

    Why does gearcase have threads and bolts?

    My '98 Johnny 150HPV6 (60*) has bolts holding the bearing carrier, plus unused threads at the terminal end of the thru hub exhaust housing. Any idea why those threads are there? Maybe for a bearing carrier puller? I have threads on my Merc gearcase (as is usual), which hold "doughnut" shaped...
  5. C

    Has anyone used the ready lime (not the brand name) to descale their outboard

    Of course, the maker of the ready lime product says it will not damage gaskets and rubber parts. Dangar Marine did a test where he soaked corroded cylinder heads and other parts in vinegar, salt-away and 20::1 HCL. The HCL solution was the strongest and it did not damage an impeller he...
  6. C

    I want to place a metal patch on a Zinc-Coated steel gasoline tank opening.

    You might consider a metal fuel line. A long rubber fuel line across the yard has the potential for damage and subsequent leaks under gravity feed. Inboard boat motors often use metal fuel lines. Coils of soft copper tubing are avail at the home despot's of the world. They are compatible...
  7. C

    Mercury 135 not running

    One more thing that occurred to me. The motor will not crank at the ign key when at WOT. You will still need to jumper the starter solenoid. Your kid is unemployed, I am afraid.
  8. C

    I want to place a metal patch on a Zinc-Coated steel gasoline tank opening.

    Are you planning a gravity feed of the gasoline to the generator, or some kind of fuel pump?
  9. C

    Mercury 135 not running

    21*BTDC at cranking speed is the max spark advance spec for my '93 135V6. Sure, your son can help, if inclined. Mine is usually not inclined.
  10. C

    Mercury 135 not running

    Remove spark plugs 2-6. Put timing light on topmost cylinder. It should be obvious which one it is. Gearcase can be on or off. If on, remove prop to keep it from chopping your feet. Idle pickup timing is 0-9* ATDC, and is set when the carbs are ready to open, but still closed. WOT timing is...
  11. C

    I want to place a metal patch on a Zinc-Coated steel gasoline tank opening.

    Yes, gas tanks were sealed until maybe the late seventies. The vapor pressure of gasoline is only so much. Tanks in those days were built to survive it.
  12. C

    Evinrude Mount Assy needed 5007470

    Crowley says they have 5 in stock and will ship immediately. You might try marineengine.com as well.
  13. C

    Evinrude Mount Assy needed 5007470

    Crowleymarine will ship in 6-8 days. https://www.crowleymarine.com/evinrude/products/5007470-rubber-mount-assembly?q=5007470
  14. C

    I want to place a metal patch on a Zinc-Coated steel gasoline tank opening.

    Around here propane is harder to get than gasoline. Analysis shows that 20# of propane and 5 gal gasoline power the generator for about the same time and cost. A much cheaper alternative is using natural gas as a fuel. Most gasoline generators can be easily converted to natural gas or...
  15. C

    How long is the skeg on a mariner 30/40

    You could put 2 straight edges on the undamaged parts of the skeg, and see for yourself the length and shape.
  16. C

    Mercury 135 not running

    It is very easy to check the timing. The check will give peace of mind, no?
  17. C

    Has anyone used the ready lime (not the brand name) to descale their outboard

    It is more useful to add a bit of garlic and onion powder and some oil to the vinegar and salt mix and pour it on your salad.
  18. C

    1972 80 Hp Mercury enhine

    I wrapped my hydraulic lines with electrical tape. It looked OK and lasted many years.
  19. C

    Has anyone used the ready lime (not the brand name) to descale their outboard

    You realize that vinegar and salt mixed together is not HCL, right? There are 10K perpetual motion machines on the internet as well. Those are crap as well.
  20. C

    Has anyone used the ready lime (not the brand name) to descale their outboard

    Gee, I am not sure how to fill and seal the cooling system of an outboard. I doubt vinegar will do anything. What is the purpose of the salt?
Top