Search results

  1. rolmops

    A little red truck.

    I don't know if any of you good people remember the topics in which a little red truck played a big role. The poster, who posted under the name Ray was banned because he was a bit too far on the far side. Me I just wonder if anybody else remembers the little red truck and if it ever did tow a boat.
  2. rolmops

    differences between mercruiser carburetors.

    What is the actual difference between merc carb 1389-9564 which is used on pre 1983 3 liter (140 hp)and 3.7 liter (165 hp) and the 1389-9350 which is used on 1984 and up to 2001 140 3 liter engines?
  3. rolmops

    Mercruiser gear ratios

    I have had trouble getting my engine -a 1984 140 mercruiser- to run at around 4500 rpm at wot while pushing a 19 foot islander with a 19 pitch prop. After a complete rebuild I managed to get it up from around 3000 to 3400 rpm, nowhere near the 4500 point. So I did some checking on lower unit...
  4. rolmops

    Green Slime

    Has anybody used it in their trailer tires and if so what is your opinion about it?
  5. rolmops

    Wrong Carburetor?

    1984 rebuilt 3 liter 140 Mercruiser with EST Voyager ignition After rebuilding, this engine runs fine and smooth but still does not want to go over 3200 rpm while pushing a 1984 Starcraft Islander with a 14.5x 19 prop when it is properly trimmed out. Trying to find the problem,I discovered that...
  6. rolmops

    1984 mercruiser rebuild with ignition problems.

    I rebuilt my 3 liter 140 Mercruiser and also my Islander. Overall although less than perfect it looks fine. One thing has not changed. I cannot get this engine to go over 3000 rpm and although it starts up fine, after 5 or 10 minutes of running,even at only 1500 rpm suddenly the rpm gauge goes...
  7. rolmops

    Islander with a Seadrive?

    Did anybody try? If so ,how did it work out?
  8. rolmops

    Adding a bracket to a 1984 19 foot Islander.

    I'm toying with the idea of removing the 140 I/O setup and replace it with a 150 or 200 horse outboard on a bracket. Has this been done ? If so, what are the structural changes that have to be done on the inside of the transom and the rest of the boat? Having 3 or 4 hundred pounds of engine...
  9. rolmops

    Towing with a Nitro

    Does anybody here tow with a Dodge Nitro 4 liter 5 speed automatic? If you do ,can you tell me how it performs?
  10. rolmops

    What to expect from a 1987 9.9 4 stroke Yamaha?

    I've been thinking about changing out my 1979 9.9 Johnson trolling motor, not because it is bad, but because I don't like to work with a Mercruiser 4 stroke and a Johnson 2 stroke. It is just much easier to run a fuel line from the main tank compared to having to deal with a second tank in a...
  11. rolmops

    What to expect from a 1987 9.9 4 stroke Yamaha?

    Tomorrow I will go to see and maybe buy the above mentioned outboard with remote control ,electric start and alternator, to use as a trolling kicker for a 19 foot Starcraft Islander on Lake Ontario. What should I be aware and/or beware of with these outboards? Is $ 450 a reasonable price if...
  12. rolmops

    Bondo snow ratio

    Hello Bondo. Can you please tell us how to measure snow when Lady Lake Ontario decides to cover your house up to the roof? I bet that you can tell us from very recent experience.
  13. rolmops

    does a 4 stroke 9.9 block fit on a 2 stroke 9.9 base?

    Is it possible to take a 4 stroke johnson evinrude (or e-tech 2 stroke) and put it on an older 2 stroke lower unit?
  14. rolmops

    Replacing trim senders on alpha drives.

    So I bought trim senders to replace the ones that should have been there on my 140 mercruiser and according to the booklet there should have been a color code like purple and blue on the connectors. Of course my connectors all had a perfect black. (Thank you Sierra). This is mostly about...
  15. rolmops

    Interchanging mercruiser carburetors.

    Does anybody know whether the mid eighties carburetors of the 140 and the 165 mercruiser engines are inter-changable? thanks,Cornelis.
  16. rolmops

    1984 Islander with140 3 liter mercruiser yet again. When will I get it?

    So I took her fir her first test run after the rebuild and everything seemed dandy,she started well and she was running smooth. I had her running at 12/14/16 hundred and so on until 2000 rpm and it sounded real sweet. Next I tried a bit faster, but she would not go over 3200 rpm,this is with a...
  17. rolmops

    140 3 liter mercruiser yet again

    Ok. So I found a good block -a 1987 chevy 3 liter-replaced its guts and everything looks dandy. The points ignition was replaced with an AC Delco electronic ignition and the timing was set with a timing shunt according to the specs at 1 past top of cylinder, which is base time for these...
  18. rolmops

    base timing for 140 horse

    Can any of you good people please tell what the base timing for a 1986 140 horse is? The points have been removed to make place for an Ac Delco electronic ignition system with distributor. I just need to set the base timing to begin the timing procedure and I do not know what it is. Thank...
  19. rolmops

    140 horse piston rods.

    So I am busy rebuilding a 140 horse engine and the usual f-ups happen. So far I destroyed a piston and damaged a piston rod. Looking for a piston rod turns out to be a bit of a challenge. Specially when you do not know for sure which year the engine is from. As it turns out, from the mid sixties...
  20. rolmops

    Dual steering cable for kicker?

    I'm just wondering, Did any of you good people ever use a dual steering cable with one cable going to the I/O and the other to the kicker? If so, what were the pros and cons? Currently I use the E Z steer system and it is less than perfect. Rolmops.
Top