Search results

  1. tpenfield

    Baltimore bridge hit by ship, collapsed

    Wow . . . (seeing the video posted above)
  2. tpenfield

    DIY - Canvas Enclosure

    That's what I was thinking . . . Thanks, Scott.
  3. tpenfield

    Water leaking from engine - 5.7 GXI-E

    Before you have the engine pulled . . . do verify where the leak is coming from. Items mentioned in this thread are . . . Core plug Exhaust manifold crack Engine block crack There are some engine block drains, on either side of the block, but the leak looks to be too far back for that...
  4. tpenfield

    Thinking about building a boat this fall

    I think 48" beam will help, but if you are really concerned you could do something like this . . .
  5. tpenfield

    Water leaking from engine - 5.7 GXI-E

    This might be the first cracked engine block of the 2024 season. :unsure: BTW - the starboard engine mount stringer is also cracked. You should have a look to see if is is wet/saturated.
  6. tpenfield

    Baltimore bridge hit by ship, collapsed

    No . . . Scott must think I live in Baltimore. (Boston . . . ) :D You are probably closer to it than me. :unsure:
  7. tpenfield

    LiFePO Batteries ???

    I just ordered about $1K worth of batteries, controllers, converter and related 'stuff' to start my battery / power system upgrade. The game plan will be to remove the existing batteries this weekend. I'm going to see how much of the 2/0 AWG cable can be re-purposed for the new system.
  8. tpenfield

    DIY - Canvas Enclosure

    After approximately 8 days of measuring, cutting, sewing I have the 8 panels of the camper enclosure to my boat ready and folded in a pile for transport to the boat on Cape Cod. I'll be doing the test fitting and marking things so that I can finish it off over the next few weeks. The...
  9. tpenfield

    Baltimore bridge hit by ship, collapsed

    Quite fine . . . Didn't even know about it until about 7:30 this AM.
  10. tpenfield

    DIY - Canvas Enclosure

    The Zippers are here !!! :D . . They arrived right around lunch time, so I'll be sewing like a bad boy this afternoon. :ROFLMAO:
  11. tpenfield

    DIY - Canvas Enclosure

    I've been working on the aft canvas . . . it goes across the stern and is approximately 9' high (long) x 11 ' wide, as it slopes from the back of the soft top frame down/over the rear seat. I've had to move my tables and sewing machine all around to accommodate the various sewing and cutting...
  12. tpenfield

    DIY - Canvas Enclosure

    Sure . . . :D
  13. tpenfield

    DIY - Canvas Enclosure

    More progress today . . . I got the main windshield piece done. . . just need some zippers . . . :ROFLMAO:
  14. tpenfield

    DIY - Canvas Enclosure

    Quick Update . . . I am starting to pick up the pace. This (below) is part of the windshield canvas where the walk-thru is located on the port side. It is actually 2 smaller pieces tacked together at the top. I did find a spare zipper to sew in where the pieces join. I got about 3 hrs into...
  15. tpenfield

    DIY - Canvas Enclosure

    Here are the forward side panels. As mentioned these are larger than the aft panels, having more glass. . . This took me about 8.5 hours for both (4.25 hrs each) to get them to this point. I had the glass pieces cut & sewn the other day. I'm still waiting on the zippers to arrive and then...
  16. tpenfield

    DIY - Canvas Enclosure

    Here is the second aft side panel. Both are awaiting zippers. . . I'm going to start on the forward side panels today. Not as much canvas on those . . . mostly 'glass'.
  17. tpenfield

    DIY - Canvas Enclosure

    This stuff is a bit labor intensive . . . but I was able to make some decent progress today. Here is one of the aft side panels (port side), along with the one I am borrowing as a template. My handy work is the one further back. I made it slightly bigger on the lower edge and ends for final...
  18. tpenfield

    DIY - Canvas Enclosure

    Thanks for your kind words. Yes, the boat has an arch and soft top. The panels attach to it. I'll need to install the bead attachments & zippers in some places, but other places already have the zippers as part of the soft top. Yes, canvas seems to take a long time as compared to the seating...
  19. tpenfield

    DIY - Canvas Enclosure

    Greetings . . . With boating season only a month or 2 away in the Northeast (USA) I have been busy doing some canvas work for my boat. My boat only came with the mooring cover, not the full camper-style enclosure. So that is on my project list for this year. . . to make an enclosure. The...
  20. tpenfield

    Divet/crane

    Yes, it makes sense. You use to make these, right?
Top