Search results

  1. B

    Difference between 2014 Yamaha F8 and F9.9

    The best that you can do is to prop the motor so that with the boat loaded and the throttle wide open it will run at or near 6000 RPM. Maybe play with the engine mounting height and the trim angle.
  2. B

    Difference between 2014 Yamaha F8 and F9.9

    From where are you getting your information? A 2010 F8CMSH is very different from a 2010 F9.9FMSH.
  3. B

    Difference between 2014 Yamaha F8 and F9.9

    In what country are you located? Reason why I ask is because here in the US the F8CMSH was last offered in 2010/2011. Long time before 2020.
  4. B

    Difference between 2014 Yamaha F8 and F9.9

    Are you trying to compare an F8SMHA with an F9.9SMHB? Just saying F8 versus F9.9 is no longer enough. These are the two models that were manufactured in 2014. Open the Yamaha parts catalog for the F8SMHA. Open the Yamaha parts catalog for the F9.9SMHB. Then open the same illustration for each...
  5. B

    Trying to figure out what model/year this is.

    I have not a clue as to where it was distributed. I would suspect that a 1984 25GM model would be very very very similar to a 1984 USA 25SN/25LN/25ESN/25ELN model, as applicable. Presumption being that your model has two cylinders.
  6. B

    Trying to figure out what model/year this is.

    1984 model year motor. Model 25GM . Just like the label says. Where are you located? This is a US website. The 25GM model was not distributed in the USA by Yamaha US. That is why you will not find it at the Yamaha USA website. If that is where you have been looking for parts.
  7. B

    Yamaha f90 starting issue

    If the throttle has to be opened to help start a fuel injected F90 then something is amiss within the motor.
  8. B

    Yamaha f90 starting issue

    Carefully inspect the main engine harness wires to the IAC connector. The wires have been known to snag on the cowling when the cowling is being removed and getting damaged. Carefully inspect for any signs of damage. Might be hard to see.
  9. B

    1992 Pro V 115 Oil Bypass - Low power question

    What country are you in? There was no 1992 P115 offered by Yamaha USA here in the US. First model offered in the US was the P115TLRR. 1993 model year motor. By low power I am presuming that you mean the motor is going into the RPM reduction mode. Low oil in the main oil reservoir will cause...
  10. B

    Yamaha f90 starting issue

    If I mentioned an idle air control valve would you know what I was talking about?
  11. B

    Yamaha f90 starting issue

    No choke. That model is fuel injected. Are you saying that the motor will crank but not start until you bump the throttle handle forward?
  12. B

    Looking to find a welch plug for 2015 6hp Yamaha

    I am assuming that you have an F6. A four stroke. Are you talking about the EPA plug that is used to try and prevent someone from tampering with the idle mixture screw?
  13. B

    Hard start question 2000 115 hp carburetor 2 stroke

    http://www.bbcboards.net/showthread.php?t=1093656
  14. B

    Source for Factory Gray paint...not blue gray

    The name really means nothing. I don't see any blusishness in the colour chip. Do you want the colour to be like it was when new or do you want the colour to be like it is now? If the latter, go to a paint supplier and have them colour match your old and faded paint. Now painting a 15 year old...
  15. B

    Source for Factory Gray paint...not blue gray

    https://www.colorrite.com/wizardresults.cfm
  16. B

    Yamaha f115 tlry losing prime during idle

    Have someone pump the primer ball continuously to keep the VST filled while the motor is running at an idle. Just a squeeze every so often should do. If the motor does not stall, that would further me to repair/replace the low pressure fuel pump. Using the primer ball will do what the pump is...
  17. B

    Yamaha f115 tlry losing prime during idle

    No more than about 5 psi I would imagine. Yamaha does not list a specification for the low pressure pump.
  18. B

    Yamaha f115 tlry losing prime during idle

    Fuel injected model. No carburetors.
  19. B

    Yamaha f115 tlry losing prime during idle

    It would appear that the lift pump is not keeping the VST filled with fuel. Particularly if the motor will continue to run if and when the primer ball is being pumped. The high pressure pump is located within the VST. If the high pressure fuel pump is allowed to run without fuel (which may be...
  20. B

    Yamaha f115 tlry losing prime during idle

    In fact, they should not be hard.
Top