Search results

  1. Scott Danforth

    87 PCM Chevy inboard temp / water pump issue

    BTW, make sure you have the raw water pump plumbed correctly. If mounted to the crank, the upper port is the inlet. Follow the arrows on the front cover
  2. Scott Danforth

    1994 OMC Sunbird Cuddy 190

    Upholstery back then used studs or screws. Look between the colors for screws
  3. Scott Danforth

    1990 Lforce engine Bayliner Capri-

    You can do your own work and find a good powerhead
  4. Scott Danforth

    87 PCM Chevy inboard temp / water pump issue

    Start at the thermostat housing and work to the pump. If not there, start going towards the exhaust manifold
  5. Scott Danforth

    87 PCM Chevy inboard temp / water pump issue

    If you haven't found the missing pieces of your first impeller, they could be blocking flow
  6. Scott Danforth

    1989 mercruiser 5.7 carb exchange

    Automotive carbs have vac ports, marine carbs do not
  7. Scott Danforth

    MERCRUISER 7.4 MPI NO SPARK

    Have you followed the troubleshooting guide? Or just throwing parts? Almost never the coil
  8. Scott Danforth

    87 PCM Chevy inboard temp / water pump issue

    https://skidim.com/fake-a-lake.html
  9. Scott Danforth

    87 PCM Chevy inboard temp / water pump issue

    A fake lake looks like a toilet plunger with adjustable handle with a hose attachment and forces water at 50 psi or more to the water pump from the pickup under the boat Trying to suck water into a bucket is a fools errand and will always result in a burned up impeller No matter how many time...
  10. Scott Danforth

    Help Identifying a Dinghy

    1940's to early 50s
  11. Scott Danforth

    2002 volvo penta 5.0 gxi and sx drive will not separate

    Abandon the Seloc manual for a factory manual Have you been pulling the drive every year?
  12. Scott Danforth

    End of Season Maintenance

    Looking for Huck brake parts....LOL
  13. Scott Danforth

    Volvo-Penta 3.0 - water in oil and other issues.

    The pic is of a 1984 or older V8
  14. Scott Danforth

    Signs of bad pour foam

    I just picked up 4 gallons of 4# from FGCI for a work project. It was mixed and packaged earlier on Friday.
  15. Scott Danforth

    Merc 5.7 Keeps Shearing starter bolts

    posts 11 and 12 are contradicting each other
  16. Scott Danforth

    4.3L Mercruiser Milkshake

    It will bolt to the flywheel housing Was the motor built as a marine motor? You will most likely need to fiberglass in new mounts Do you have 4.25" extra in the bilge You will need new exhaust manifolds, a new marine distributor
  17. Scott Danforth

    5.7L MerCruiser Bravo III under water...repairable?

    Suggested reading links 14, 15, 18, 2, 3, 4a, and 4b in that order https://forums.iboats.com/threads/how-tos-and-other-great-information.283508/
  18. Scott Danforth

    5.7L MerCruiser Bravo III under water...repairable?

    It's almost NEVER the transom gasket It is almost ALWAYS a rotten transom
  19. Scott Danforth

    No spark, 91 536

    New still need to be filed Dwell meter will not only tell you when you haved them gapped properly, however will also work as trouble shooting
  20. Scott Danforth

    Mixing Mercruiser 120 ( 1971 ) with Alpha Gen II ( 2000 4.3L )

    You will need to simply swap the 2.5 in where the 4.3 was and use the A1G2 flywheel housing
Top