Search results

  1. Scott Danforth

    Through hull fitting extension for livewell plumbing

    per your picture, you have to access the non-accessable space. just cut a hole in the deck, glass in a pocket down to the hull.
  2. Scott Danforth

    Engine dies after 40 minutes

    if you think its the tach, disconnect the grey wire at the coil Have you removed the spark arrestor and looked down the carb throat to make sure you get two streams of fuel if you move the throttle? have you tried to open the fuel tank filler cap? if it makes a hissing noise, your fuel vent...
  3. Scott Danforth

    2016 182SC dark blue gelcoat

    have you contacted stingray for the gel coat match? Have you tried spectrum?
  4. Scott Danforth

    aquasport 175 osprey

    LOL.....
  5. Scott Danforth

    Is my mercury oil injected?

    do a compression test. I bet cylinder #3 is low. running on straight gas will take out the motor. first to go is cylinder #3
  6. Scott Danforth

    Sharp Door Stop

    grab a file and round the corners. its a 2 minute job
  7. Scott Danforth

    Boat will not plain fast

    those are anodes to keep corrosion at bay. My guess, with everyone sitting in back, you were too butt heavy for the boat to get out of the hole
  8. Scott Danforth

    Boat will not plain fast

    ^^^^ what they asked. sounds like you had a "boat load of people" in the stern
  9. Scott Danforth

    Can the base of engine work? Two to bolts under engine are rusted and can

    Do a leak down test on cyl 3
  10. Scott Danforth

    aquasport 175 osprey

    You know you have to pull the carb and open it up
  11. Scott Danforth

    Wiring Gauge Question

    downriggers lights amp bilge pump
  12. Scott Danforth

    Through hull fitting extension for livewell plumbing

    Look in a marine catalog Mcmaster is an industrial supply house NPS or barb to barb with a hose
  13. Scott Danforth

    Through hull fitting extension for livewell plumbing

    No
  14. Scott Danforth

    Slip WANTED for Catalina 38’

    start calling marinas around palm beach on the sun coast, you are looking in the $15/foot/month range and a 2 year waiting list
  15. Scott Danforth

    1971 4hp mercury outboard

    motor has to be turning over to shift dont try to shift a non-running motor
  16. Scott Danforth

    OMC 1993 3.0L Cobra. What oil to use?

    or 15W40. it will all work
  17. Scott Danforth

    Stein Boatworks

    over the past 100 years, many hundreds of thousands of boat manufacturers have come and gone, many making as little as 1 hull. its not even in the fiberglassics library http://www.fiberglassics.com/library/index.php?title=Main_Page
  18. Scott Danforth

    Diagnosing miss at high RPMs for VP 7.4GL with EST electronic distributor

    If the OPs numbers are right, he has a diesel. Spec for a stock Gen VI 7.4 GL (L29) is 9.1:1 compression, 330hp and 150psi cranking compression numbers
  19. Scott Danforth

    1998 Cruisers Rogue 2420 re-gel and interior

  20. Scott Danforth

    1998 Cruisers Rogue 2420 re-gel and interior

    for those in the know....... my boat exterior scheme came from an image from this web page. https://www.formulaboats.com/blog/guide-volvo-vs-mercruiser-boat-motors/ specifically
Top