Search results

  1. alldodge

    5.0 mercruiser 04 OM696715

    Talking a 160* Stat I'll assume raw water cooled Do you have a 3 point or 7 point drain system? The 3 point has a lot of hoses connected below motor up front
  2. alldodge

    Need help with adoption issues re: deceased parent

    As a heads up, probate court usually appoints an attorney to over see unless someone is there that can show just cause to appoint another. The issue with attorney's as we all know, they can eat up the estate real quick with their fee
  3. alldodge

    All gauges went out. What to look for?

    My guess is it lost the ground at the helm. If a fuse/breaker blew the motor would stop, but a ground can kill the gauges but the motor keeps running
  4. alldodge

    Need help with adoption issues re: deceased parent

    ok I understand sorry for missing it. Utah deceased didn't have a will but they want to give the car to the neighbor that helped. A person in KY without a Will, will have an executor appointed by Probate Court. The executor will have all powers to settle the estate. To find out who has been...
  5. alldodge

    8.2 Mercruiser Mag strange error at specific RPM, code 61

    I would need the service manual to know for sure so I would just be guessing
  6. alldodge

    8.2 Mercruiser Mag strange error at specific RPM, code 61

    No, the in-gear switch is to keep the RPM's below 2900 if it's in neutral
  7. alldodge

    8.2 Mercruiser Mag strange error at specific RPM, code 61

    Welcome Maybe the in-gear switch on shift plate After your running, disconnect the switch
  8. alldodge

    Need help with adoption issues re: deceased parent

    Any vehicle coming into KY from out of state also requires the local Sheriff to do a safety check. Think it's about $15
  9. alldodge

    Need help with adoption issues re: deceased parent

    Called the local DMV here in KY Need a copy of the official Executor paper working showing who is appointed Need a Bill of sale signed and notarized, from and to whom Also signed title if Utah is a title state otherwise what ever they use to Lic local
  10. alldodge

    4.3l mpi crank no start

    Might still be low voltage reading from corrosion. Measure voltage at the key switch Red/Purple wire before and after start. Check 5V circuit at either oil pressure sensor (Gray wire or 3 wire plug) to ground. I think you have a water pressure sensor on power steering cooler, and if so same...
  11. alldodge

    Boat ran great,stalled,now only runs a few seconds

    The SAEJ1171 is just a marine safety standard With it saying Petronix then it has been changed from points to electronics. Could be the Petronix burned out. Measure voltage on the + side of the coil with key ON not running
  12. alldodge

    Boat ran great,stalled,now only runs a few seconds

    With 2 wires it may have been changed to something like Petronix or other. Points has just one wire going to coil
  13. alldodge

    Boat ran great,stalled,now only runs a few seconds

    Welcome Could be a lot of things Being a new to you boat there is a lot of things that should be done before ever taking it out the first time Start with checking the fuel filter. When boat dies pump the throttle and look down throat of carb to see if there is any fuel in the carb Being a 85...
  14. alldodge

    Alternator Belt

    37619T with 5 1/2 water pump pulley 52 inches 816295T with 7 inch water pump pulley 52 1/5 inch, Sierra 15-15490 Search for length and several will come up. Do need to know how wide the belt is so just measure
  15. alldodge

    4.3l mpi crank no start

    Thanks for the SN, your have a 555 ECM With the solid alarm the ECM is seeing either the drive lobe bottle low or overheat. Disconnect the lube bottle and the ECT sensor on the thermostat housing. The ECT will have 2 wires on it
  16. alldodge

    wire turned black

    Read the rules, don't post in old threads
  17. alldodge

    Loud tapping noise when accelarating under load 3k rpm

    If you have EST distributor then timing is done by the module inside the dizzy. The module has the connectors showing
  18. alldodge

    Loud tapping noise when accelarating under load 3k rpm

    This is the correct procedure
  19. alldodge

    Loud tapping noise when accelarating under load 3k rpm

    Any timing light is good, but the advance type is easier. Also depends on how well you can see timing marks on damper Color leads to running rich, might just happen more so at idle To time EST need to connect shunt and by pass interrupter
  20. alldodge

    Loud tapping noise when accelarating under load 3k rpm

    As Bondo mentioned in first thread there is detonation going on, and the run on after shut down and hard start all lead to incorrect timing. Don't have the manual for your motor but Merc timing can be anything from 1*BTDC to 2*ATDC depending on the serial number. Merc uses the Delco EST...
Top