Search results

  1. flashback

    gas in oil

    Well then I would suggest that a carb float may be sticking which could account for the smoking and fuel on the water..
  2. flashback

    gas in oil

    Not familiar with your engine but fuel injectors can leak..
  3. flashback

    Installing New OEM Egg Crate Foam for Engine Hatch?

    I would have torn the foam out long ago, there are some advantages in being able to hear the beast...
  4. flashback

    '63 Steury 14 1/2 ft

    Sweet lookin
  5. flashback

    Hydroplane fin

    He's referring to a fin that is installed on the trailing end of the port sponson to hold the boat in turns. I suppose you could either add one to starboard or eliminate it altogether, I don't suspect it will have much effect on a small low power boat. The boat I built has a small fin on either...
  6. flashback

    Hose popped off - Alpha 1 Gen 2

    If you leave as is I would take the clamp off.
  7. flashback

    is a 60hp outboard too small for this boat

    It is, I saw it in popular mechanics and pop said he would help build it LOL. we got the plans and he did the cutting and I got to do the glue and screw, along with the sanding and painting.. motor lasted a couple of summers, I blew it up and the boat has been in the shed ever since. Probably...
  8. flashback

    Can Rollers Damage the hull?

    Any way you cut it, bunks distribute the load over a much larger area and both need to be set properly.. roller or bunk.
  9. flashback

    is a 60hp outboard too small for this boat

    I have a hydroplane I built with dads help in 1961 called a scat cat he found a 18 HP merc that was less than 100 lbs. Still have the boat,a few years ago I thought about finding a motor but nothing is available these days that comes close..
  10. flashback

    Mini split outdoor condenser rodent guard advice

    That unit looks pretty tight the mouse might have entered it from inside the wall..in any case I feel your pain but I think I would look for the entrance rather than cage the entire unit.. The chicken wire I'm familiar with is too big to stop a mouse, hardware cloth would be a good choice.
  11. flashback

    Hard starting 4.3LX, normal or not?

    I guess you could wire a momentary button to energize the pump and prime the carb before you start cranking.
  12. flashback

    Forklift dropped boat on ground - damage?

    Pressurize the toon then check all the welds with soapy water...
  13. flashback

    Honda BF25A leaking oil when hot.

    I have an old BF 75 on a sailboat and a mud dauber type bug stopped up the crankcase breather hose which caused the engine to leak oil past the main oil seal under the flywheel..
  14. flashback

    is a 60hp outboard too small for this boat

    All good info, you may have a perfectly fine motor, provided you stick with the above advise..
  15. flashback

    is a 60hp outboard too small for this boat

    If existing motor runs decent give it a go and see if it makes you smile..
  16. flashback

    Dry Firing Outboard

    3 seconds at 700 rpm and you may be okay, 3 seconds at 3000 rpm and your probably not okay..
  17. flashback

    2019 25hp Yamaha Fouls lower plug but not the other ?????

    I think you're running on one cylinder.
  18. flashback

    SEI Marine products...Anyone buy from them?? Quality??

    There has been some talk regarding early failure on I/O water pumps in the past from SEI..
Top