Search results

  1. jimmbo

    Boat Disposal

    That 1977 25hp looks really nice
  2. jimmbo

    1984 115 hp mercury inline 6 Trim problems.

    1983 was the last year for the Old Power Trim system on the Inline 6. All 84 Inline 6s had the new External System
  3. jimmbo

    Lower Unit Interchange

    For a few years, when first introduced, the 120/140 used a larger case and the Props that were used on the V6s. After a couple yrs OMC went back to the Smaller V4 case as part of the 'Fixes' to reduce some Issues that they were having with the 120/140's Acceleration. By the late 90s the 130 once...
  4. jimmbo

    Livewells filling with water not hooked up or turned on

    Every Live Well I have ever seen had a Drain. Some drained into the Bilge(a bilge smells bad enough, no need to really stink it up with fish crap/slime), others outside via a thru hull fitting. Still others use a Pump to empty it overboard, useful when the Boat isn't removed from water
  5. jimmbo

    Classic Fifty electric choke testing and replacement

    Check the Solenoid for Continuity, and also check its Grounding. You can also put a Light/Meter on the Lead going to the Solenoid and see if power is getting there when the Key is pushed in
  6. jimmbo

    Boat Disposal

    There was lots of Cutting of the Hull, Deck, and Cap after, even before being removed from the Molds. Sanding as well. I doubt any PPE was worn, or even provided for those at greatest Risk
  7. jimmbo

    First start after lower unit rebuild - new boat owner

    How long of a Hose, and its internal diameter, as well as any fitting on it
  8. jimmbo

    First start after lower unit rebuild - new boat owner

    That statement, just doesn't sound right
  9. jimmbo

    Boat Disposal

    Business Owners that made Glass Boats were certainly willing to take that Chance... with Employee's Health, not their Own. If I had my way, they would be looking at very long Prison Sentences
  10. jimmbo

    First start after lower unit rebuild - new boat owner

    Clear up?
  11. jimmbo

    First start after lower unit rebuild - new boat owner

    There are Idle Reliefs that are are part of the Transom Plate, that have a bit less backpressure than the path thru the Prop. Needed to be able to start the Engine, and allow it to Idle
  12. jimmbo

    Do you guys think this prop and rudder have been in salt water ? From a moomba 2007 LSV

    I would say no. Some brackish freshwater perhaps, but there isn't any evidence of Salt on other parts of the boat or trailer
  13. jimmbo

    First start after lower unit rebuild - new boat owner

    Welcome to iboats What is your concern?
  14. jimmbo

    1969 85 Hp evinrude V4 tilt trim?

    Power Tilt was offered. Power Trim didn't happen until 1973, and it cannot be retrofitted. There are Aftermarket Trim systems that may or may not work, mainly because of the Way the pre 73 Motors were fastened to the Transom
  15. jimmbo

    Repowering a 87 20ft sportcraft open fisherman

    Welcome to iboats The dealer thought it was a 4 stroke? Did you have anything in Writing from dealer with the motors Serial#, and that it was a 4 Stroke? The incompetence of Dealers seems to be growing Daily Granted, you should have seen the Oil Reservoir in the Boat? No 'Lack of Oil' Alarms?
  16. jimmbo

    Dry Firing Outboard

    Think what you want, and when it fails out on the water, you can think about it some more, as you row back
  17. jimmbo

    Asking alot of a little outboard. best prop pitch?

    Welcome to iboats You are going to need to know the Engine WOT Rpm Range, and some way of measuring Engine Rpm. I don't know what Range of Pitch is offered for a 40hp Force. Perhaps there is a lower pitched 4 blade. This is one place where a 4 Blade would be of Benefit. But you will need to...
  18. jimmbo

    Looking for a fuel pump or kit (1967, 60 HP)

    This service manual(one of the few better, than Outhouse Paper) says the newer pumps weren't serviceable.
  19. jimmbo

    Oil leaking from prop assembly

    Milky oil coming out the Exhaust is often normal. However Milky Oil in the gearcase is not. Water getting into the Case, can force Oil-Water out, Did you get the either of the Marinas to do a pressure/vacuum test on the case? Have yo put some on a Gloved Finger and smelled it? If it is just...
  20. jimmbo

    Mercury 6 hp idle jet access

    Mercury made a 6 HP over a large number of years. A Serial #if it is an older Motor, and a Model #, if it is a newer one
Top