Search results

  1. Scott Danforth

    Engine replacement help…

    look for a late 90's bayliner with a good 5.7/alpha 1 Gen 2 and a rotten hull. grab the whole motor/drive
  2. Scott Danforth

    I need the part number for oil pressure sensor

    Have you gone here and looked? https://www.volvopentastore.com/
  3. Scott Danforth

    Engine replacement help…

    what we have here.......... is a failure to winterize....... or a thermal-declination material breach
  4. Scott Danforth

    leaking riveted starcraft ('82 MR180)

    Im going to go with the thru-hulls use some good tyvek tape. tape over the thru-hulls. then drop in the water
  5. Scott Danforth

    Aluminum DuoProps?

    I do not endorse anything but the D series or the F series. the new X series is a compromise, just like the J series I personally buy older props with spun hubs and have them re-hubbed vs buying new.... mainly because there are 3 types of boaters down here. those that have hit something...
  6. Scott Danforth

    305 boat cam

    4-relief pistons are just stock carp to allow Johny assembly line worker to assemble them on a Monday with a hangover If you are going thru a rebuild. Look at LCQ style pistons and focus on quench Like the kb179
  7. Scott Danforth

    Aluminum DuoProps?

    A means to remove cash from your wallet?
  8. Scott Danforth

    Boat paint tips

    you need an etching primer for aluminum. or at least alodine to etch it.
  9. Scott Danforth

    Worn through gelcoat

    you are going to need more than just gel coat by your description of exposed core.
  10. Scott Danforth

    projects other than boats

    Got a bumper made up. Will be front, however may need a V-bumper then I will move to the rear
  11. Scott Danforth

    data tag location

    4-relief pistons are stock carp. Nothing special. It allows Johny assembly line worker to be able to assemble the motor on a Monday with a hangover Chev used the Vortec name long before the vortec heads. The Gen 2 SBC (LT1) used the same combustion chamber as the vortec heads, however the...
  12. Scott Danforth

    data tag location

    For the motor, you are dealing with the 1992-1995 vintage of motor. Balance shafts, non vortec
  13. Scott Danforth

    Worn through gelcoat

    That's literally in the middle of nowhere 1 hour from anywhere I say drive down to St Pete and hit up FGCI
  14. Scott Danforth

    data tag location

    The sticker was intended to last thru the 1 year warranty period.
  15. Scott Danforth

    Engine replacement help…

    Most likely a bent con rod from hydro lock
  16. Scott Danforth

    Worn through gelcoat

    Where in Florida. Suggest you buy your supplies local. Lots of fiberglass supply houses down here
  17. Scott Danforth

    data tag location

    Sticker on top the air cleaner cover
  18. Scott Danforth

    Serial id. Help

    It's your money, but ^he is right about the balance and design
  19. Scott Danforth

    2008 Regal 2200 RX windshield needed

    That's odd about Taylor as we just got some curved roof glass for a buddy's 10 year old 48'. 2 pieces of glass, $10k.
  20. Scott Danforth

    VOLVO PENTA OUTDRIVE DROPPING INSTANTLY

    With the drive up fully, pull the gland end hose. Then go to raise the drive. If oil comes out the open hose, your piston seals are bypassing. If no oil comes out, look at the HPU Or you can have the drive all the way down and pull the blind end hose, then lower drive
Top