Search results

  1. alldodge

    Another Plumbing Question

    Don't know but it is hard water
  2. alldodge

    Maybe my turn for new boat time

    Have discussed prior using it under the top Need snaps or something else for bow cover and when windshield is not available Only found one There are no manuals, only install instructions for items installed. Have owners manual for motors. Don't even have manual for radio. Going to call...
  3. alldodge

    5.7 TBI possible fuel pump issue

    Might be VL but need to find out if fuel pressure is correct
  4. alldodge

    Another Plumbing Question

    Not Galvanized but do understand your thought, thanks much
  5. alldodge

    Ford 302 (888) wiring confusion

    Right back to post 5, not relevant You have a Pet ignition, and it needs to be wired according to Pet, not the original wiring
  6. alldodge

    Ford 302 (888) wiring confusion

    Correct The white supplies full 12V when key is ON White supplies 12V to choke so it heats it up and slowly opens it as motor starts and warms up It goes to "original" coil to supply full 12V for starting purpose and once started, "using old points" it changes to 6V thru the ballast resistor...
  7. alldodge

    Ford 302 (888) wiring confusion

    Agree with Bondo, this makes my head hurt First your using a Pertonix ignition, so do "NOT" look at the original wiring, you have to look at what "Pertonix" want's for wiring. Not able to use old and new wiring. Only wire to use with full 12V is white
  8. alldodge

    Maybe my turn for new boat time

    Insurance starts 1 April, but all I have to do is call them and have it start sooner. My guess is it will be sooner. Have taxes and family out of town stuff this week so we'll see Thinking about going with Boca Shade and mount on the hardtop https://myboatshade.wixsite.com Not having a...
  9. alldodge

    Ground fault with black wire melting

    Didn't know I was going to be reading a novel , o_O Correct That would be a good plan Your going in the correct direction and should find all the circuits that have a problem
  10. alldodge

    Another Plumbing Question

    The pic shows what I found. This is a Rheem water heater, one of their forever tank models (bladder type). I installed about 2 years ago and at first there was a slight leak. Tightened it up and all good until now. It looks wet but it's not. On top is a dielectric union and bottom is brass...
  11. alldodge

    What is this hose coming off of fuel pump

    I'm unable to tell if that is the wrong kind of hose but it goes to the flame arrestor. If (note the if) the pump diaphragm inside the pump starts leaking, there will be fuel in the hose going to the arrestor. This keeps the fuel from going into the bilge Should be tygon tubing
  12. alldodge

    Maybe my turn for new boat time

    What might be happening is one motor feeds isolator and charges it's Bat along with House. Only thought if this is I thought is can this have an issue with the PCM have a possible voltage drop of 0.7V :unsure:
  13. alldodge

    Maybe my turn for new boat time

    No understand Has a 3 bank charger and 3 bats. Which is charging both?
  14. alldodge

    Maybe my turn for new boat time

    The deck is dirty because I'm not taking off my shoes yet. To many in/out's arranging things, but it is gelcoat. The boat has just 2 Bat switches (Engines and House) and when their turned on it takes a few seconds of their red led flashing before they go solid. Then things can be used...
  15. alldodge

    Nav light bulb replacement

    Don't know and been unable to find one like it, but have seen them many times. I would guess the white top piece is snapped on. See if something thin can be slide between green and white on top In most cases its a bad connection and not the bulb. Most folks don't run at night enough to burn...
  16. alldodge

    6.2 fuel injection problem

    What's your serial number?
  17. alldodge

    Maybe my turn for new boat time

    First thing we did is remove the Dealer info off the trailer and boat (n)
  18. alldodge

    Maybe my turn for new boat time

    Yes, but its either white or black, and we want blue The guy doing the canvas has done other things for us and he does great work
  19. alldodge

    Intake manifold verification

    Then should be no problem. What ya run into is just finding something for a 302, but with closed cool it can be treated like a car
  20. alldodge

    Intake manifold verification

    You need a marine intake but could get by if in fresh water (for many years) or if closed cool. If in salt there is no way
Top