Search results

  1. Scott Danforth

    I did another thing, ha ha ha I can’t wait 😁

    Ammo is expensive for the .44
  2. Scott Danforth

    89 Horizon 180 with stock 4.3 upgrade questions

    I would do a vortec 4.3 with a 4 barrel. Almost 50 more hp than your 1989 2-barrel
  3. Scott Danforth

    Volvo Penta 4.3 GL Water In Cylinders After Running

    Trust no one but your own wrench turning
  4. Scott Danforth

    DPSM gimbal bearing

    There is only one gimbal bearing and it fits both Volvo and Mercruiser
  5. Scott Danforth

    can anyone id this model?

    What does the paperwork say it is
  6. Scott Danforth

    Big differences, same power?

    My guess.....88/89 were old rating system of flywheel rating. 90+ was new rating system for prop rating
  7. Scott Danforth

    Just thought I'd share a nice photo.

    Ft DeSoto
  8. Scott Danforth

    4.3 GL-D Parts Manual

    Or parts sites like vovlopantastore or marineparts
  9. Scott Danforth

    V/P Duo Prop. Would going from F5 to F6....

    Weigh the boat Check compression You should be getting 4500 RPM easy with F5swith a healthy big block Dry weight of 5200 would be wet wright close to 6400# 5200# dry weight 680# of fuel 25# of other fluids 100# of batteries 100# of anchors and lines 300+# of other gear 100# of canvas, etc
  10. Scott Danforth

    14 AWG wire in between switch and device smaller wire

    14 gauge is heavier than 16 gauge
  11. Scott Danforth

    Volvo Penta 4.3 GL Water In Cylinders After Running

    Pressure test the cooling water jacket. If it doesn't hold 15psi, you have a cracked block or heads
  12. Scott Danforth

    '83 Bayliner Capri Resto on Vancouver Island, BC

    Don't bandaid it with a plate. Do it right
  13. Scott Danforth

    Water in the intake

    Willing to bet that is your leak right there. Cracked exhaust is junk
  14. Scott Danforth

    Water in the intake

    Is that epoxy covering a crack in the 3rd picture?
  15. Scott Danforth

    Gear case

    the pinion is toast, the dog clutch is toast. with that much metal running around in the gear case, assume the bearings are toast.
  16. Scott Danforth

    Dealing with bogging for too long and need help because I've done just about everything!

    compression numbers? fuel pressure?
  17. Scott Danforth

    '83 Bayliner Capri Resto on Vancouver Island, BC

    transom is soft as evidenced by the cracking around the bolts
  18. Scott Danforth

    Sportcraft Li'l Sport, worth restoring?

    its worth more sentimentally to you than it would be to restore to flip. cool little boat. I would restore it just for the cool factor. would make a fun little dinghy sitting on the swim platform of a 50 footer.
  19. Scott Danforth

    Water in the intake

    pull the elbow. look at the joint faces. not the outside of it. you are in troubleshooting mode. you have about a day to clean that water out of the motor and either have the motor running, or need to flush all the surfaces with alcohol then oil until you get it running.
  20. Scott Danforth

    Dealing with bogging for too long and need help because I've done just about everything!

    measure compression, post all numbers here measure fuel pressure, post all numbers here. what is your ECT. should be in the 170 range
Top