Search results

  1. Scott Danforth

    Copper crush washers ok to use?

    Even in fresh water galvanic corrosion will be an issue Use the plastic crush washers
  2. Scott Danforth

    Copper crush washers ok to use?

    Copper and aluminum do not like each other from a galvanic corrosion point of view
  3. Scott Danforth

    Replacement distributor 153ci mercruiser

    You are looking for a marine distributor than meets SAE J1171 that has an integral coil? There is only one company and that is DUI. No one else wanted to pay the royalties for the patent.
  4. Scott Danforth

    In-boat camshaft replacement - 7.4 Mercruiser

    Without degreeing the cam and working backwards for a cam card, almost impossible to identify
  5. Scott Danforth

    What engine in new boat

    my VP AQ275 came with a 715CFM holley 4150 VP put 600 CFM on the 4.3 and 500 CFM Holley 2300's on the 3.0
  6. Scott Danforth

    1975 Pontoon with OMC120 stringer, replace with Mercruiser 3.0 Alpha one?

    No, not even close the stringer mount is 4 points. the forward mount with or without electric trim and the aft trunion mounts the transom on an OMC needs to only be thick enough to hold the screws for the boot. the mercruiser mounts off the transom. the transom shield clamps to a transom...
  7. Scott Danforth

    Owners Manual

    until the last decade or two, boat manuals were only offered by less than a dozen boat manufacturers. Brunswick, Chaparral and a few more. boat manuals 40 years ago were non-existent.
  8. Scott Danforth

    In-boat camshaft replacement - 7.4 Mercruiser

    should, however you would have to look into the proper push-rod length. I have never kept non-adjustable rockers on anything.
  9. Scott Danforth

    Shifter is tight

    which Volvo Penta drive do you have? have you serviced it? is this a moored boat? trailered boat?
  10. Scott Danforth

    Pausing to cool down

    service your cooling system if you have overheating issues. a properly maintained cooling system can run until you need to stop for fuel without ever coming off plane. I would say you could run flat out, however not on a stock recreational motor.
  11. Scott Danforth

    Evinrude Paint

    moeller also has paint. in-stock at your local west marine.
  12. Scott Danforth

    Volvo Penta SX-M Gear Ratios?

    from my google fu Within the 22/23 Upper, you can choose from five different gear ratios. Those are 1.43, 1.51, 1.60, 1.66 and 1.85. As for the Volvo SXM 21/26 upper, there are 1.79, 1.97 and 2.18 ratios
  13. Scott Danforth

    5.7 Mercruiser stalls out

    bring a paddle, or keep it strapped to the trailer on a deep cement ramp
  14. Scott Danforth

    4.5 mercury 2 stroke

    you will be fine with a kicker bracket. you wont be on plane.
  15. Scott Danforth

    Transom and floor replacement

    pretty sure post #14 covered that.
  16. Scott Danforth

    Boat choice

    The ski nautique is a ski boat, not a wake boat The moomba is also a ski boat, however you can add bladders and get a bit of a wake. Just don't add too much If your desire is wake, then the moomba
  17. Scott Danforth

    4.5 mercury 2 stroke

    I would have no problem with a 4.5hp pushing a 20' boat as a kicker. My buddy used a 2.5 on his dinghy to push his 37' sailboat 4 miles when his Perkins died I have access to a Honda weed wacker motor based outboard that moves my boat (granted, a bit slow)
Top