Search results

  1. Scott Danforth

    spun prop hub, or bad coupler... how to easily tell the difference....or can you?

    The two prop shops I know that rehub are green bay propeller in suamico Wisconsin and general propeller in Bradenton Florida. Most prop shops ship to general propeller
  2. Scott Danforth

    Is this a rare silverline?

    If you look at actual volume of manufacture, all boats are rare However most boats, even if it's a one-off, doesn't make them more or less valuable than the next boat
  3. Scott Danforth

    5.7 vortec pertronix and Holley big carbs timing

    What is the advance curve? Total advance? Is it knee shaped or linear? Stock motor? Modified Cam duration? Lift? Rocker ratio? What intake? Single plane, dual plane? air gapped? What size carb? Series? List number? Primary jets, secondary jets, power valve size? Carb spacer? My...
  4. Scott Danforth

    Mercruiser 6.2 cracked engine block from cold

    I believe they are different. However not by much The OPs best route is to find a complete bobtail
  5. Scott Danforth

    No fuel - check my work and add as needed

    on a volvo, the electric fuel pump gets its power from the alternator with any new to you boat, before putting the boat in the water and going, do all the maintenance the prior owner didnt do pull the drive and do a bellows job, gimbal bearing inspections, u-joint inspection and check the...
  6. Scott Danforth

    Alpha 1 Gen 2 proper dog engagement noise.

    shift it like you stole it.
  7. Scott Danforth

    Ok. Trailer time!

    Wisconsin does not have trailer titles for trailers under 3000#. do you have a family member north of you?
  8. Scott Danforth

    Filling with fuel issue

    in addition to all the tips above my old Avanti fuel fill line inner wall failed and acted as a flap valve. the only solution was to replace the 2' of hose
  9. Scott Danforth

    Trim tab blowout

    those are Bennett cylinders, and bennett sells upper hinges every day.
  10. Scott Danforth

    Mercruiser Sterndrive Gear Oil Leaking by Prop

    https://forums.iboats.com/threads/must-have-technical-information-for-diyers.335378/ https://forums.iboats.com/threads/miscellaneous-mercruiser-information.323278/ look in these links for the special tools. you will be pulling the bearing carrier
  11. Scott Danforth

    FLYWHEEL HELP!!!

    Any of today's marine transmissions. ZF, twin disc, velvet drive, etc. They are all for LH motors and your choice of RH or LH as fwd
  12. Scott Danforth

    Filling with fuel issue

    My first thought is either a blocked fill line, or a blocked vent line
  13. Scott Danforth

    1990 Wellcraft 223 Eclipse

    First , welcome aboard Next, reach out to Taylor Made. https://www.taylormadeproducts.com/windshield-glass-solutions/ Make sure you are sitting when you get the quote
  14. Scott Danforth

    8.1Gi milky oil and making oil

    My guess is it's not the head gaskets My first thought is a cracked block or leaking exhaust manifold. Pressure test
  15. Scott Danforth

    Buying my first fishing boat

    Get the aluminum tiller boat and fish with that. Have caught more fish in a 1959 14' aluminum with a 12hp gale tiller than many people with 60k rigs
  16. Scott Danforth

    2007 Merc 5.0 TKS stalled at speed, had to be towed

    Gauge sender is different than switch for fuel pump
  17. Scott Danforth

    1997 Sunesta 210: depth finder and engine compartment insulation

    Transducer technology changes every few years
  18. Scott Danforth

    FLYWHEEL HELP!!!

    You would be mistaken.
  19. Scott Danforth

    Will a 24’ pontoon fit a 22’ trailers?

    buying the wrong size trailer means something is not supported correctly and the load center is off, so the tongue weight would be off.
  20. Scott Danforth

    Who here would buy a boat with 1400hours on a 454 mpi?

    I managed to get 5 years of salt use with a painted trailer. rinsed the trailer with salt-away every time. however after 5 years, anything that was supposed to roll.......didnt. Upholstery will need attention. after 2004, the threads, vinyl and foam no longer carry arsenic as the...
Top