Search results

  1. alldodge

    2002 Mercruiser 5 liter MPI cold start issue

    Thanks 555 ECM Place a voltmeter on pin D of the DLC connector. With Key turned ON there should be 12V. The 12V should stay there when cranking
  2. alldodge

    Boat going in reverse instead of forward

    As a non expert, I'm just going by what your telling me. Hey @Texasmark maybe so.e help. You say everything works as it should and you have a right handed prop on the motor
  3. alldodge

    Boat going in reverse instead of forward

    No expert, but that would be my guess. Have not heard of a Force Merc motor, but post your question in one of those sections and have a better chance of getting a more knowledgeable person Otherwise might just get a left had prop and go boating
  4. alldodge

    91 four winns 285 winterizing question

    Just looked the manual up and it shows a drain (item 7) in the manual. Its its not there look for a plug. I winterize my HW tank by draining and then connect a short piece of hose between the inlet and out put of tank. This way you need much less AF That said, I also don't use AF in my water...
  5. alldodge

    2002 Mercruiser 5 liter MPI cold start issue

    First guess is needs a new key switch, but lets investigate What is the motor serial number?
  6. alldodge

    Mercruiser 3.0 TKS problem at cold air temperatures

    Not marked in the manual but look like vent opening for float bowl and maybe venturi
  7. alldodge

    7.4 Mercruiser Distributor, Ignition, coil

    Without the module you don't have a working ignition. The link chris has list parts and how the TB ignition works. Search for Delco EST and it will show what it takes. All ignition except points or petronix or the like require a module
  8. alldodge

    Bravo 1 oil leak

    No, the oil hole has to be in the same place. You have new style so just look the the oil hole inside the large o ring on the water jacket
  9. alldodge

    how to change a prop on mercruiser alpha one outdrive 4.3L 2010 bayliner BR 195

    I would use a short piece of 2x4 between ventilation plate and prop to hold.
  10. alldodge

    Drive Lube Bottle Cap

    If you can make one, post it up.
  11. alldodge

    Second Happiest Day . . .

    CATs and get to show everyone you can dock easy peezy. Before, you could show them you can dock like a pro without the joystick :cool: (y)
  12. alldodge

    7.4 Mercruiser Distributor, Ignition, coil

    If you do have a TB module connected, then run thru the TB module then run thru the troubleshooting guide
  13. alldodge

    7.4 Mercruiser Distributor, Ignition, coil

    Yes, otherwise your going to use a different ignition Yes, TB, Delco EST, MSD, DUI or old school points Yes, if you connected the Negative side of the coil to the pick up, its fried I would suggest buying a Delco EST ignition
  14. alldodge

    Drive Lube Bottle Cap

    Would be nice to have an aluminum Res with a sight glass and actual replaceable check valve. If Merc made it the probably cost a grand
  15. alldodge

    Drive Lube Bottle Cap

    Did find as the bottle fills the plastic bottle gets soft because of the hot lube. Once it cools back down it stiffens up again. I like the bottle because it can tell if the drive is leaking, but could make a better one easy enough. The switch is nice but for the most part not necessary for a...
  16. alldodge

    Drive Lube Bottle Cap

    Only have done the annual maintenance. The valve is still attached and the small tip remains visual on top. I did take the old off and clean under it thinking maybe there was a small something under it. Reinstalled and tried again, and it build and leak again.
Top