Search results

  1. alldodge

    HVAC Heat Kit Installation Electrical Question

    Guess its all in the issues you run into. I'm on my 3rd AC unit at this house. The Janatrol lasted about 8 years, the Rheem as about 12 years. Hope the Amana last longer. Amana was made by Goodman and is currently made by Daikin
  2. alldodge

    5.7L V8 Engine lock/clunk problem

    When it does this does it start to turn a slow real fast or just stop? If it slows real fast and starter grunts hard, it could be your timing is off a bit and/or compression is the issue. If your running higher compression, the fuel may start to burn before the spark hits it due to heat...
  3. alldodge

    HVAC Heat Kit Installation Electrical Question

    Have had many brands including Trane, Colman and I stay away from Janitrol and Rheem. Installed Amana 3 years ago in home and 2 years ago in vacation rental with wifi thermostat. Chose Amana because they have a 99 year compressor warranty and my buddy is Union HVAC installer and what he...
  4. alldodge

    Good engine for rebuild

    What Scott said If you stick with the block and want to go stock, can look up online a 1988 or so Chevy pickup with same motor. Then use the cam that is listed The Merc cam (not knowing serial number) 431-811658 (item 11) roller lifters...
  5. alldodge

    Good engine for rebuild

    Truck/marine cam, marine head gaskets and brass or stainless core plugs
  6. alldodge

    5.7L V8 Engine lock/clunk problem

    Thanks Have you check the temp of the thermostat housing with a IR temp gun? How much does the temp go up when motor is turned OFF? If the motor is getting to hot (gauge showing good) then this could be the issue. Did you pull plugs to verify no hydrolock?
  7. alldodge

    5.7L V8 Engine lock/clunk problem

    Explain further; where is the 200* reading being seen?
  8. alldodge

    HVAC Heat Kit Installation Electrical Question

    The coils should only come ON during a defrost cycle (Unless EMHeat) and only when its really cold. The short time they come ON should not even notice much Thing its the white thermostat wire that calls for the coils, an could also switch it The two new ones installed they used the 3 element...
  9. alldodge

    Merry Christmas - Happy Holidays

    MC all Ya'll
  10. alldodge

    Gas seeping from fill cap

    It doesn't burn much at all doing winterization. Depends on how warm it gets. Then if it sits with the bow up a bit higher then when hooked to the truck, this also can add to the issue
  11. alldodge

    Gas seeping from fill cap

    Don't fill it up. My Rinker use to do the same thing and only happens when it gets warm if I filled it up. Gas expanded do to getting warmer then when it was filled.
  12. alldodge

    Winterize boat

    Using it every few weeks I wouldn't do much if anything
  13. alldodge

    Manual #17 Question on Versions

    See how many pages there is. Mine has 967 pages and one manual
  14. alldodge

    any active members near Rockville MD

    Local Uhaul open trailer rental, 14hr drive, hotel room, 14 hr drive I'm doing similar Sunday going to Texas with Friend to pick up a Kubota CTL
  15. alldodge

    any active members near Rockville MD

    Don't know if there correct but found front and rear https://www.gmpartsstore.com/oem-parts/gm-pontiac-solstice-bumper-cover-89025064-89025064?origin=pla&gclid=Cj0KCQiAlZH_BRCgARIsAAZHSBkSHpQhSIAFsL_s1AuUfbbD98h0NElHt021IWLBHA7U2fjfI3AYzhAaAtu2EALw_wcB...
  16. alldodge

    Prop selection 3.0 cobra -140 Hp

    There will be more then 100 rpm difference between a 3 and 5 blade prop. Someone has defective equipment, is trimming up to high, doesn't know what their doing, or is lying
  17. alldodge

    Prop selection 3.0 cobra -140 Hp

    Need to check your tach
  18. alldodge

    Merc 7.4l 454 Gen 4 to 5 interchangeable?

    Can look here as to where the numbers are and how to look them up https://www.mortec.com/location.htm
  19. alldodge

    Volvo DP leak.....HELP

    This gives me concern that the boot was not installed correctly and may be leaking at the clamp. Either that or the seal between drive and bell housing is the issue. The crud about its the drive and they do not respond makes me wonder about the shop Don't see this being the issue because if...
  20. alldodge

    Column Replacement

    Edger, don't own one anymore, just weed wacker. This is my short term rental that we rent out, so 2 places to take care of
View older results
Top