Search results

  1. Scott Danforth

    Bayliner Capri 2150 resurrection.

    I wouldnt use a multi-vis oil in the drive unless it was a GL5 gear lube. Straight SAE 30 has much higher shear than 10W40
  2. Scott Danforth

    Can the base of engine work? Two to bolts under engine are rusted and can

    go to the restoration forum. open the 4th sticky down. read the threads on links 14, 15, 18, 2, 3, 4a, and 4b in their entirety. watch every video. then after that, you will have the information you need to do the job yourself.
  3. Scott Danforth

    1978 Chrysler floor help?

    1" above the bottom of the hull, 6" spacing, 1/4 or 5/16 drill, no more than 1" deep Usually only needs 3 or 4 holes to verify If the shavings are light-colored, dry, and smell like fresh cut wood, just mix up marine tex and fill them However if the shavings are dark-colored, wet and smells...
  4. Scott Danforth

    Steel Caps or Bearing Buddys?

    I have lost 3 BBs over the years I now carry a spare and wont ever loose another
  5. Scott Danforth

    What is it a 230 or 250 GM straight 6 F0916CCD 10W147291 Casting #3921968

    Both of those motors came from something else and were transplanted into the boats
  6. Scott Danforth

    After market fuel pumps

    Rock Auto ships to Scotland (faster than they ship to Florida)
  7. Scott Danforth

    After market fuel pumps

    I would order from rock auto or summit
  8. Scott Danforth

    Transom Leak Help

    make the test drills and get the answer. its been almost a year and everyone has told you the same thing.
  9. Scott Danforth

    Random

    blew coffee on the keyboard
  10. Scott Danforth

    Transom Leak Help

    and you cant post the videos as in the tutorials
  11. Scott Danforth

    Transom Leak Help

    I would change the transom if I have to ride in it.
  12. Scott Danforth

    Bayliner Capri 2150 resurrection.

    SP 280 is SAE 30 or GL5. (all fluids are SAE 30 - engine oil, PS fluid, Trim Fluid, drive fluid) the DP requires GL5. uses nearly 3 quarts. you fill by the plug on the back of the transmission near the shift linkages (just up and to the right of the shift shaft) Seloc manuals make good couch...
  13. Scott Danforth

    Random

    medical tests the next 6 Fridays..... Think the tiretracks are readable.
  14. Scott Danforth

    Can the base of engine work? Two to bolts under engine are rusted and can

    the lag bolts are just galvanized lag bolts available at your local hardware store. those are not supplied by Mercruiser
  15. Scott Danforth

    1978 Chrysler floor help?

    Remember, wet and rotten are followed br dry and crumbling. Its just when the mold and bacteria finish what they started
  16. Scott Danforth

    What is it a 230 or 250 GM straight 6 F0916CCD 10W147291 Casting #3921968

    Hunt down the serial numbers and look. I myself would probably build up a 292 vs a 250
  17. Scott Danforth

    OMC control from 71 SlickCraft, Dauntless V6

    The controls would only work on electric shift Steering cable and helm are cheep, no need to try to salvage
  18. Scott Danforth

    Transom Leak Help

    Dont trust the clymer manual on anything. Go to volvopentastore.com and pick your correct motor/drive for the right parts
Top