Search results

  1. Scott Danforth

    1970 mirrocraft sport fisherman

    steel and aluminum together will also have galvanic corrosion. add a bit of moisture and you have issues. just dont add anything caustic..... but wait.....you have green treated lumber in there. that is caustic to aluminum, the chemicals from the treatment will eat the hull of that aluminum...
  2. Scott Danforth

    Hi couple of questions from the uk

    welcome aboard aluminum is normally bonded in as a screwing strip for things like windows, cleats, etc.
  3. Scott Danforth

    1967 MFG Sprint. Steering cable Help

    that is a fools errand. get a new cable
  4. Scott Danforth

    Carb Recommendations for 5.7L Vortec?

    I normally make my own transition spacers. I start with a 4-hole spacer and a die grinder.
  5. Scott Danforth

    Larson Composite Transom Leaks?

    Knock tests mean nothing Does it leak with the motor running while tied to the dock, or just underway? Use a flashlight, mirror and your phine on a selfie stick and look
  6. Scott Danforth

    over heats above 3500 rpm

    And just above the Oring is the white metal fitting the hose connects to that should be replaced every few years because it corrodes
  7. Scott Danforth

    Dashboard update Four Winns Vista 258 1999

    most of us make our own gauge panels.
  8. Scott Danforth

    454 knocking noise and water in oil after sitting for 4 years

    rattling and water in oil. both would say pull the motor so how was the motor winterized 4 years ago.
  9. Scott Danforth

    How fast have you gotten your sailboat?

    70mph behind the truck
  10. Scott Danforth

    Ran out or gas, and Gas can

    https://www.amazon.com/Magicfour-Replacement-Water-Faster-Flowing/dp/B07ZT3GPKR/ref
  11. Scott Danforth

    Bought this boat from Auction need help!

    at a minimum, replace them with plastic best, to replace them with bronze
  12. Scott Danforth

    engine pinging and backfires and stalls

    degreeing the cam would catch this
  13. Scott Danforth

    engine pinging and backfires and stalls

    Pinging and backfiring is improper timing, running lean, dirty carb or bad fuel
  14. Scott Danforth

    Damaged leg

    the skeg is there primarily to protect the prop from hitting things
  15. Scott Danforth

    Mercruiser 3.7L 190 Starter Motor Cannot be removed (Rusted in)

    pull drive (part of annual maintenance anyway) pull motor (45 minute job) put motor on engine stand address starter issue while motor is out: clean bilge, inspect transom, etc.
  16. Scott Danforth

    Boat storage

    drain it, and if you are worried about rust, fill with anti-freeze. heated storage is one storm away from cold storage. think texas, the chemical plant that went down in winter because the power went out that is still down.
  17. Scott Danforth

    Bought this boat from Auction need help!

    plastic thru-hulls get brittle and snap off starting at 5 years. some make it to 15. they all break
Top