Search results

  1. MH Hawker

    upholstery question

    I had some seats made last year and didn't think to have a lifting strap made into it, So I added that later, but it needs a bit of fabric added to hold the strap up so you can get a hold on it. The question is what sort of glue. I was thinking super glue.
  2. MH Hawker

    its getting borning some one needs to break something

    Re: its getting borning some one needs to break something That`s a nice set up and mine is more or less the same thing I just went a bit bigger so I can go inside of it and work over the winter. I made mine out of 2 in pvc and common T and elbow fittings. the stand off poles are 6 foot, to...
  3. MH Hawker

    Pipe line explosion

    We has a 20 inch pipe line break open and catch fire earlier today. Sissonville, West Virginia: Explosion From Gas Line Burns Interstate 77 And Homes (PHOTOS)
  4. MH Hawker

    Cooler live well

    Re: Cooler live well I used one of that type of pump some years ago, and the bait would get up under the pump and plug up the screen on the intake or their scales would. I am sure the much newer ones have addressed this. I made a live well on my new boat and used a aerator kit and it works...
  5. MH Hawker

    vacuum and pressure test

    I will be redoing my LU over the winter and in the past I have done it the hard way, and I decided to get a vacuum/pressure pump and do it the right way, and with what research I have done it looks like abound 5 psi, both negative and positive, for one hour, that seam`s to be the standard and...
  6. MH Hawker

    iboats delivery

    Re: iboats delevry Re: iboats delevry Yea its 4, 16 foot boards and 2, 12 footers, and 2, 3 foot bow stops for a total of 94 feet. It was cheaper to just get a 100 foot roll.
  7. MH Hawker

    iboats delivery

    I ordered a 100 foot roll of bunk carpet 2 days ago for a pending project. Need to redo my bunks on my pontoon trailer. It was delivered today, man that's fast service. :plane:
  8. MH Hawker

    Rebuilding a rotten pontoon; replacing floor, console, seating and wiring.

    Re: Rebuilding a rotten pontoon; console, seating and wiring. Re: Rebuilding a rotten pontoon; console, seating and wiring. I recently made one my self and ended up putting around 150.00 plus my labor into it. Materials was a sheet of pressure treated 3/4 plywood and some scrap 3/4 PVC trim...
  9. MH Hawker

    Boat Covers

    Re: Boat Covers I will sort of just toss this out there as a thought. Personally I don't have a garage so short of paying for indoor storage a cover is your garage and even if you pay for storage you still have to have a cover to keep your things out of sight and slow them down from walking...
  10. MH Hawker

    Huberds shoe oil

    I don't know how many or if any out you all use this. Its a leather conditioner I have used for 20 plus years I use it on ever new set of leather shoes I have owned. I use it to ease break in and add life, and I just ran out and the local store has went out of business, but I was very re leaved...
  11. MH Hawker

    What to do with fishing rods while trailering

    Re: What to do with fishing rods while trailering Well I made a box to keep mine stored in all year while the box at in on the slip and out of the way when not needed.
  12. MH Hawker

    wiring help

    Re: wiring help This may help. click on the picture to make it bigger.
  13. MH Hawker

    new console

    Re: new console Finley got the last picture of it after the studs and wing nuts added. That should make it a lot easier access
  14. MH Hawker

    its getting borning some one needs to break something

    the tittle say it all, I know its late in the season but. I guess I will go out the slip and tear apart my controller and geese it to have some thing to do. :p
  15. MH Hawker

    fuel fluctation problem

    Re: fuel fluctation problem Well had a good day so headed out to the boat armed with 2 new fuel fittings and a can of sea foam. put in the sea foams first and took it for a 6 mile run and that seams to settled down the top end rpm fluctuation. Rand that tank dry and thought I would change the...
  16. MH Hawker

    fuel fluctation problem

    I have a Canadian made 1996 mariner 9.9 Ser # 0G119661 on a 20 foot pontoon boat remote controlled. I seam to be having a fuel fluctuation issue. The motor has been ran a good bit over the summer and over the last few weeks I have noticed a change in performance it wont hold a constant rpm. I...
  17. MH Hawker

    1988 Riviera Cruiser

    Re: 1988 Riviera Cruiser because ever thing had been per-cut all I had to do was use a razor knife to remove the vinyl and foam the access door is going to be a slip over a stud type with wing nuts to hole it in place, I used epoxyed in SS T nuts from the back and its a simple matter of...
  18. MH Hawker

    1988 Riviera Cruiser

    Re: 1988 Riviera Cruiser I haven't been doing much work to it over the summer but got in a lot of cat fishing, ended up so far with a total of 230 pounds and now that the water temps are starting to drop off the fishing is slowing down and have a few weeks before the stripers start hitting I...
  19. MH Hawker

    tach for 2 stroke

    Re: tach for 2 stroke I just added a tach, volt meter and hour meter to mine but i went with cable plug in from the controller it just seamed simpler.
  20. MH Hawker

    new console

    Re: new console Got it finished up today and got ever thing installed and finished up will test it at the lake tomorrow going to get in some much needed fishing. I added a tachometer. volt meter and a hour meter. Some different view`s the old one the new one
Top