Search results

  1. eggs712

    What Is everybody using for spark plugs

    When I couldn't find NGK plugs locally, the Champion L76V worked out fine.
  2. eggs712

    1985 Bayliner 2750 Ciera Sunbridge Resto

    I wish I could pretend it was my idea! I'm always scouring forum archives trying to find good ideas
  3. eggs712

    1985 Bayliner 2750 Ciera Sunbridge Resto

    The fore deck hatch/emergency escape I remade early in this project developed a crack in the glass last year from the hole I drilled in the glass; it was a single crack that I could live with, but last spring, the glass sprung more cracks after some weather changes. Instead of ordering new...
  4. eggs712

    changing transducers and fishfinders.

    I have a couple Echomap Ultra 106SV units. Bass Pro/Cabelas has them at $1000 with the GT-54 transducer. I like the touch screen plus buttons for when it's choppy. The GT54 reads bottom well at speed for me until about 250 feet deep, and the Sidevu is okay until about 100 feet deep at 460kz.
  5. eggs712

    My 84 4winns horizon 195 project.

    I bought a roll of 1/4" PE foam for the same purpose. It's a decent insulator, closed cell, and relatively inexpensive. I'm just using Dap Weldwood to glue it to the hull.
  6. eggs712

    1985 Bayliner 2750 Ciera Sunbridge Resto

    I've still been working on the Bayliner, just been tackling some elbow grease projects I hadn't completed. The blue gelcoat matching on the port side from a year ago had an issue on the last coat where the temperature dropped too low and never completely cured. I hoped it would harden more if I...
  7. eggs712

    1985 Bayliner 2750 Ciera Sunbridge Resto

    It's been a while, so I thought I'd share a little update: My 70s era bay boat was beginning to show wood rot, and the heavy square tubing steel trailer also rusted to the point of being unsafe. I've had a functional boat all my adult life, so a working boat takes priority over my projects. The...
  8. eggs712

    How/where to put in a stereo in my (new to me) Triton 175 fishing boat?

    I mounted a 500W Bluetooth speaker bar on my center console. It's a wired connection for power, but it's plenty loud while running at speed and is much less invasive than installing a stereo.
  9. eggs712

    My 84 4winns horizon 195 project.

    Congrats, looks great! Also nice job on how quickly you finished.
  10. eggs712

    1981 Springbok 18' Restoration/Renovation

    I bought a 316 stainless bow eye off Amazon that was a close fit to the original. I had to squeeze it together slightly in a vise to get it to fit though. Make sure that the other hardware with the eye such as nuts and washers are the same metal to prevent galvanic corrosion.
  11. eggs712

    1985 Bayliner 2750 Ciera Sunbridge Resto

    I finished assembling the wood pieces of the head: For my first sewing project, I made a snap-in EVA piece for the dinette. I backed it with black vinyl made for chairs to roll on (wasn't really sure what to use) with 1" sunbrella binding. The sewing is imperfect, but it was good practice...
  12. eggs712

    Fuel tank installation

    I would think it would depend on adhesion of the strips. If your tank has to be shoved into place, you don't want the rubber strips being knocked out of place.
  13. eggs712

    Livewell and Interior design brainstorm

    Deep cycle batteries weigh 60-70 pounds each, so you'll have some listing to the livewell side. I also run a small boat for fishing and move my coolers around to help balance weight as needed.
  14. eggs712

    1985 Bayliner 2750 Ciera Sunbridge Resto

    Minor update: I've gelcoated most of the cabin interior, and it has surprisingly helped A LOT with the outside heat thus far. Previously, it was unbearable past 90 degrees in the cabin, and now it's like being in the shade with the portholes open. I've decided to go ahead with insulating the...
  15. eggs712

    My 84 4winns horizon 195 project.

    The styrene fumes are nasty; it makes me feel hungover the next day if I get too much exposure. I bought some organic vapor cartridges since my cabin boat is has poor ventilation, it does help a lot.
  16. eggs712

    1985 Bayliner 2750 Ciera Sunbridge Resto

    I'm using white FRP for the headliner with 1/2" foam and reflectix underneath. I'll secure the FRP with 1/4" varnished cedar planks using SS screws and finishing washers. For the ceiling lights I've already installed, I bought some nylon standoffs/spacers to make them flush mount; I kinda wish...
  17. eggs712

    Re-powering a 1978 21' Starcraft Mariner - Engine Help!

    Maybe stick some newer decals on your motor?
  18. eggs712

    1985 pro craft 1750v

    My '83 1750V had a half-inch deck.
  19. eggs712

    1985 Bayliner 2750 Ciera Sunbridge Resto

    I'm hoping by the end of this summer.
  20. eggs712

    1985 Bayliner 2750 Ciera Sunbridge Resto

    Saturday, I used vapor barrier to make templates for the V-berth and dinette cushions: My Singer 15-91 has been rewired, gears re-greased, new brushes installed in the motor, and thoroughly oiled. It appears to be running great, so I can hopefully start learning to sew on weeknights while...
Top