Search results

  1. MickLovin

    Kill switch on Chrysler 100HP

    HI, does anyone know if the Chrysler 100HP came with a kill switch, I am thinking of installing one as I am always fishing in my boat by myself. Thought it maybe a piece of mind, but also I like to move around the boat so not sure. :confused:
  2. MickLovin

    Aussie Chrysler Club via iBoat Friendship

    HI, I am unsre if this against the rules and have no intention of breaking any I have read. I would like to start an Aussie Chrysler Club within iBoats forums, through adding friends in Australia who have Chryslers or Force outboards. This may help all of us locally to private message each other...
  3. MickLovin

    Best manual for a 100HP chrysler

    Hi guys, just a qucik question and some advice on which manual to get for my Chrysler, I already have a manual from when I owned my 75hp but it doesn't show enough detail and it is pre 1976 models and my 100hp is 1979, but it is more about some more detail. Is the Seloc manual or Clymer manual...
  4. MickLovin

    Differences between a 1972 12.9hp Chrysler and 6hp Chrysler

    Hi guys, Bought a 12.9hp motor for $23.30, I cleaned it up which involved repairing a hole on the right hand side as you look from the front, I opened up the hole to find more corrosion, after cleaning the area I prepared a metalic bog and bogged over the hole while covering the exhaust vent...
  5. MickLovin

    12.9HP with exhaust fumes out in the cowl

    I am having exhaust fumes coming through between the power head and where it is bolted to, letting exhaust come into the cowl and choking the engine, the engine runs fine without the cowl but as soon as you put it on it suffocates it, the only gasket I can see on the parts list of where it might...
  6. MickLovin

    help! 100HP spark problems - distirbutor

    Firstly I will start by saying that I have a 1979 100HP Chrysler outboard model 1007H9A from memory, ok firstly I went to start my outboard today and remembered last night I had actually shorted a wire on my ammeter so I was a bit worried about starting it. Ok so no start it wound over as usual...
  7. MickLovin

    12.9hp Pull Cord (won't stop looking)

    HI out there, I am on again letting everyone know if they have a junked 9.9 to 15hp Chrysler, that I am looking for the manual starter don't need the rope but need the recoil part.:pray2::positive:
  8. MickLovin

    Pull start recoil unit for Chrysler 12.9hp

    HI guys, I am not having much luck with my pullstart or finding parts for it, so if there is anyone out there that may have a spare pull start recoil for a chrysler 9.9 - 15hp let me know plzzzzzzzzzzz!! :blue:
  9. MickLovin

    12.9HP chrysler model 122HC 1972 or 1

    Hi guys, I need to rattle your brains for a lower unit gear oil seal for this model chrysler and also the impeller part no. I am not sure but I think the part number for the seal is F901307-2 and I think the impeller is F436065-2 but I am not sure on either and would like someone to advise
  10. MickLovin

    Chrysler 100hp Carbie kit

    I have noticed in the carby kits and parts catalogue, that they show a inlet needle, seat and gasket as well as a inlet seat gasket, I noticed on the bottom of the inlet seat a rubber bottom to it, is this the inlet seat gasket as I haven't seen a gasket on my 100hp or my 75hp carbies in this...
  11. MickLovin

    Prop Codes and compatability

    Ok I took off my prop from my 75HP 1980 Chrysler, it is a stainless steel prop with a code of A511265, it may be a volvo penta prop as when I had it repaired, that is what they called it. Here's the thing, my prop on my 100HP is smaller in diameter and has a code of 528.23., as I can't find...
  12. MickLovin

    Filling your tilt trim motor on a Chrysler

    Hi guys, I can't see in my manual how it says to fill my tilt trim motor, I was under the impression you fill it when the motor is tilted up, but after reading a thread about a problem with a tilt trim, Jerryjerry advised that it is to be done lowered :confused:, can anyone tell me which is the...
  13. MickLovin

    Can a carbie jetted too small get cold 100HP Chrysler

    Just out of interest sake I want to ask a question about my carbie and what happened to it out on the water, firstly a bit of history, I put a 75hp 066 jet in my 100hp carbie when they should have been the 080, not knowing at the time it would or could make any difference, it was more of a...
  14. MickLovin

    Knock when i decellerate 100HP Chrysler

    I took my boat out with the 100hp chrysler and found it wouldn't go onto plane, it felt like I had an electrical problem as sometimes it would not even start as well. It seemed to idle ok but as soon as I opened the throttle it bogged down and had no power. I took it home and replaced the cdi...
  15. MickLovin

    100HP Chrysler 1979 Model 1007H9A - Carbie covers

    Hi all I am looking for 2 plastic carbie covers, I can't see them in a parts list so I am unsure if this model came with them or you can get some to suit from another hp model. If you know of any available please let me know as i have scoured ebay etc looking for some. :eek:
  16. MickLovin

    Suzuki DT115HP 1984 no spark #3 and #4

    I have no spark on #3 and #4 of my suzuki 1984 Dt115hp outboard, I changed leads to see if it was the coils and the coils work fine on #3 and #4 but no spark when connected up from cdi as #3 and #4 only work connected to #1 and #2, does this mean a CDI problem or could it be the stator, I don't...
  17. MickLovin

    Ring Free Results So far

    Hi, after using ring free for about 1 hour at 2 half intervals, I have found that so far my motor is idling much better and it has spat out a lot of black crap from the exhaust. The spark plugs are still fowling but this may be due to ring free still in the system as a shock treatment, It has...
View older results
Top