Search results

  1. 1

    Force 1989 125 question

    This is how I used meter and magnet to I’d triggers and wires
  2. 1

    Force 1989 125 question

    Moved on a bit magnet idea works can you confirm that trigger 3 has the timing arm attached to it I have then worked out that bottom right trigger no 1 bottom left is no 3 top left is no2 top right is four
  3. 1

    Force 1989 125 question

    Hi thanks yes those are diagrams I already have on back of block and workshop manual .i was wondering if I were to run a magnet over pick up whether I would be able to read at wire ends with a fluke meter had I realised when stripping colours were not the only thing needed noting I would have...
  4. 1

    Force 1989 125 question

    No sorry that link doesn’t help definitely not after market trigger it has loom entry with all eight wires going into it and obviously each of the eight wires go in to a trigger 1 pair for each cylinder but I need to find a way of knowing which wire is the trigger wires for which cylinder to...
  5. 1

    Force 1989 125 question

    Sorry not quite getting it I have 2x orange 2x red 2x green 2x white green trace that come out of trigger as one loom can’t trace which triggers wires are connected to so are you saying as long as they go to right colours on terminal strip that’s it will triggering not be wrong if not in right...
  6. 1

    Force 1989 125 question

    Hi and thanks for response, I have that diagram on my engine but my wires go into trigger unit all at one point so I have no way of knowing what wire colour etc is going to which trigger point on unit.hope my English explanation is understandable
  7. 1

    Force 1989 125 question

    I’m uk and connection is messing about saying not sent etc
  8. 1

    Force 1989 125 question

  9. 1

    Force 1989 125 question

    Sorry thought I was asking guy who already had asked similar question but whist you are on Jerry do you have any idea how I can trace each of 4 triggers to wires as 4 pairs of wires
  10. 1

    1995 120hp Force CDI wiring diagram help!!!!

    Hi I also have a trigger question the wires for trigger on my 1989 125 8 in total in pairs of colours ie 2 of each colour how do I find what wires relate to what cylinder please
  11. 1

    Force 1989 125 question

    Hi all finally got rebuild all done been down a year I am just hooking up electrics have a question on trigger wires ? 8 wires 2x white and green 2xorange 2 red 2xgreen do I have to identity which wires are for which cylinders ? Or just follow wiring colours on end of block diagram if I have to...
  12. 1

    Force 125 lacking power

    At least I will know my motor intimately inside and out any tips on the ring and hone job ?
  13. 1

    Force 125 lacking power

    So I will pull the pistons hone and re ring.but that ring is on no1 cyl.my non firing cyl is no2 so looking like. I’m doing some more work and money but if it needs it so be it but still not at point of finding misfire fault
  14. 1

    Force 125 lacking power

    Didn’t get to boat today I’ve spoken to a few motor cross people today ie 2stroke people and they say.2nd ring plays no part other than be a guide and support for piston unlike 4stroke where bottom ring is scraper oil ring they also said to get motors to rev they take out 2 ring pistons and fit...
  15. 1

    Force 125 lacking power

    Just question would the ring gap be in line with port holes I was thinking with how much solid bore there was it shouldn’t be in line with port and as I say none of the other 3cylinders are.and my other question was if as I’m thinking this is wrong and what I remember seeing is a much bigger gap...
  16. 1

    Force 125 lacking power

    I will take a photo of ring gap tomorrow just seems strange to have gap in line with port when no other pistons do.?.
  17. 1

    Force 125 lacking power

    So got to spend more time on motor yesterday my focus has all been on no 2 cyl.had resigned myself that was putting back together without finding anything.started cleaning water galleries threads etc. Giving bores a wipe etc.no 1 cyl when piston is in line with exhaust ports the second ring on...
  18. 1

    Force 125 lacking power

    Thanks just didn’t want to waste new head gasket if it ends up being pulled apart again and I’m pretty convinced it will as everything I have looked at has had a fault but not cured problem. But nothing wrong with head head gasket but happy it got taken off as pretty bunged up around cooling...
  19. 1

    Force 125 lacking power

    Hi I regasketed them with the modified quicksilver one and done starting fluid test around them has no effect now with the new gaskets but still have no2 not firing put on new coil and moved cyl to cylinder as I say as soon as parts come I will put back together was wondering whether to first...
  20. 1

    Force 125 lacking power

    I have run it with spark tester on sparking.i brought the adjustable spark jumper you recommended jumps great big gap. This is why was asking about drawing air on two halves of block or triggers.i took head off hoping to find a blow thru from. Cyl 2 to cyl1 or 2 to 3 not the case all good on...
Top