Search results

  1. M

    What the Hell Just Happened?

    I was logged on, went out to do some work and came back in to check some of the posts. When I refreshed the screen the site format was different than when I first logged on. Aggg! At my age I can't deal with change :) Where'd the "Search" function go?
  2. M

    Kicker for Use in Saltwater?

    I'm starting to scan Craigslist for a small (under 10 HP) motor to use as a kicker for my boat. Use would be strictly for emergency power, as backup to my 30 year old Mariner. The boat is used strictly in saltwater. Apparently there is/was a difference between motors made for use in saltwater...
  3. M

    Bearing Buddy Grease Fitting Replacement?

    One of my Bearing Buddy grease fittings seems to be screwed up. After I pump grease in, and remove the gun, grease squirts out the fitting. I know Bearing Buddy's are not that expensive, but it is in good shape otherwise and seems like a waste to dump it when I could replace the fitting for...
  4. M

    More Fishfinder Selection Questions

    I've been reviewing posts on this forum and searching the web for selection criteria for a fishfinder. Based on this research, my understanding is that (what seem to be the most important criteria): 1. Pixels are important, the more the better. Vertical pixels are particulary important if I...
  5. M

    Suggestions for Console Arrangement

    I'm slowly accumulating the new instrumentation for my 16 ft. Bayrunner (aluminum). Looking for suggestions on best locations for mounting. I'll be mounting a Garmin handheld gps, in their marine mount, a fishfinder (brand/model yet to be determined) and probably a compass. I'll also be...
  6. M

    Question on Choice of GPS Map Media

    OK, so I bit on the Garmin GPSMap 76Cx (handheld) on sale at West. I've been playing with it and am impressed so far. I also bought the 12 volt power cord and the marine mount. Now I want to add marine charts and maybe a North American street map. However, my ignorance level in this area is...
  7. M

    Garmin Handheld GPS 76CX

    EDIT Anybody use one for boating/fishing? Any input on value? Application would be in a 16 foot open skiff in bays and nearshore coastal waters of Southern California. Mainly to return to good fishing locations.
  8. M

    Another Ethanol Question - Adding Fresh Fuel to Older Fuel

    I've looked at the posts here and some on-line references. One thing is not clear to me. What happens if I have a small amount of old (say 90 days) fuel in my tank and fill the tank with new fuel. Will the old fuel mix with the new fuel and form a mixture with slightly different phase...
  9. M

    Proper Bunk Positioning

    I want to do some fine tuning on my trailer to improve launching ease. When I redid the bunks I just put them back in the same positions as the old ones. Now, taking a closer look, I notice they (two bunks) are not even aligned with each other. The boat is flat bottomed aft and the bunks are...
  10. M

    Thoughts on LVLP Spray Guns?

    I've been using my 40 year old Sears paint spray guns for many years, spraying away at 40 - 50 psi in a cloud of atomized over-spray that drifts over my makeshift "spray booth" and over the neighborhood. I've been looking at some of the more modern alternatives, but am not interested in adding...
  11. M

    Mariner 30 vs. 30A - How Much Difference?

    I've been following a thread on identifying the year of a Mariner, and, in looking at the serial number reference I realize I may have been overly optomistic about the availibility of parts for my motor. I have a 1982 Mariner, 30 HP, w/serial number 30EL 689 407533. I thought I had found...
  12. M

    Marine Chart Plotter/Auto GPS Combos?

    What's the current status/selection available? The posts I've found on this topic are 2-3 years old. I'm hoping the features have improved and the prices lowered somewhat by now. I'd really like to have a chart plotter for my boat, but even with my most creative thinking haven't been able to...
  13. M

    Trailer Bunk/Roller Adjustment?

    I've reviewed a number of posts on this subject and want to find out if I have it right. My boat is an aluminum Bayrunner, 15 ft. 6 in. long - a "V" in the front, transitioning to a flat bottom aft. It has an aluminum keel section, 2 inches deep, running from the bow to about 18 inches short...
  14. M

    Access for Torquing Head Bolts?

    I'm going to install a cylinder head temperature gauge on my OB. The sensor mounts by removing one of the upper head bolts and bolting it on. I'm thinking it might be appropriate to re-torque all of my head bolts when I do this. Problem is, the two lowest head bolts are not accessable with a...
  15. M

    Where to Purchase a Cylinder Head Temperature Gauge?

    My Mariner doesn't have any port for a water temperature gauge so I'm limited to a cylinder head gauge. Does the iboats Marine Store stock these? Can't locate one on the site. Any other sources/recommendations?
  16. M

    Diagnosing/Fixing Cooling Problem Help

    1982 Mariner, 30 HP. First run after bringing back to life (after 20 year sleep) - ran good, but overheated when running at high speed. Now in "fixit" mode. Pulled lower unit. Everything looks OK. Impeller that was replaced in April, w/only about 2 hrs. running time, in good shape, flexible, no...
  17. M

    Heat to Free Seized Shift Shaft Coupler?

    1982 Mariner, 30 HP. Upper and lower shift shafts are joined with a threaded coupling that is seized (preventing me from dropping the lower unit). I'm working with penetrating substances in an effort to free it up. I'm thinking heat will be the next step, if that is un-successful. I've read...
  18. M

    Mariner Lower Unit Removal Help!

    Finally at the point where I'm going to have to drop the lower unit on my 1982 30 HP Mariner to see why its not pumping water. After reading a number of posts I got the impression that it's a piece of cake. Naturally I run into a problem right out of the chute. I have the factory service...
  19. M

    Mariner Cooling Water Flow Path?

    Finally got the boat w/30 HP Mariner (1982 vintage) in the water today. Ran great for awhile, then started overheating although there was a strong stream coming out the tell-tale. Limped back in by stopping to let it cool down, then restarting and making some more headway. Hopefully no...
  20. M

    Anybody Made a Kicker Mount?

    Thinking ahead, if I come up with a good buy on a 4 HP or so 2-stroke for emergency ride home - how to mount it. The store bought ones for salt water use are pretty expensive. Anybody made one? Fixed or retractable? Share photos?
Top