Search results

  1. W

    Questions, 1988 smoker craft 15 ft

    Hi all I just purchased a 1988, I assume 88 becuz last 2 of serial number are 87, it had no bilge pump in it the boat has a full floor livewell rod locker front deck too tiller Evinrude 25 electric start, my ? Is where should I run out my bilge pump hose? I now have it going out the closest...
  2. W

    1977 evinrude 35 hp will start and run til just when you accellerate

    I think I found my problem both my coils are cracked or have cracks, Ive had the carb apart 3 time so checked the coils, I filled the cracks with black gasket maker until I get new coils, wires looked good, comp 120lbs.
  3. W

    1977 lund 315 deluxe, mounting mnkota all terrain tm?

    Hi im trying to decide where to mount my older mnkota all terrain lanyard type tm, my boat has that goofy bow, I was thinking of an angle to the front on the opposite side of console in front any ideas? Thanks
  4. W

    1977 evinrude 35 hp will start and run til just when you accellerate

    Still the same ALL jets cleaned and checked with magnifying glass! Does anyone know the float height adjustment? Thanks
  5. W

    1977 evinrude 35 hp will start and run til just when you accellerate

    Hi I got this lund 315 deluxe with a same year 35 hp evinrude, when im just putting along and punch it it sputters and dies, I just had the carb off tonite and cleaned inspected it found nothing out of round it has blue spark, compression over 100 lbs pretty even any ideas? Thanks. Joe
  6. W

    1983 35 hp electric start separate. Choke swit ch

    Hi I just got a 1977 lund 315 deluxe with a 35 hp evinrude on it are any of u familiar with a separate choke "toggle" swit h set up? It has one, how or can I put a ignition switch style on it tha nks
  7. W

    1996 m30a3 fuel pump kit

    Hi does anyone know where I can get one? Thanks
  8. W

    1996 m30a3 tohatsu possible to splice two 7mm plug wires together

    Hi all i'm in a spot I trimmed to much plug wire off my cdi I know duh well anyhoo since a new cdi is 2 to 300.00 has anyone on here ever spliced two wires together by soldering etc the old inserts were corroded and I was going to replace the caps the plug wires on this cdi are molded into the body.
  9. W

    1996 tohatsu m30a3 2 stroke float adjust?

    Hi I just got my carb kit I doesn't look like the float is adjustable the rest of carb is spotless also what's the starting air adjustment 1.5 turns thanks for help compression in my motor is 145 lbs.
  10. W

    Anyone else bass fish in wisconsin?

    Just wondering I'm from the rice lake area pretty good around here!
  11. W

    Update 1987 merc 115 I-6

    Hi people well I think I finally am going to get my motor squared away the tech who worked on it last fall didn't know what he was doing the he replaced a trigger coil that was just tested good by another mechanic who just cleaned off the connectors they were corroded! Well anywho everything...
  12. W

    Its that time again!

    Hello all I have a 1987 115 i6 with 120 lbs of compression but no spark it was worked worked on stator checked out good a brand new trigger coil 200.00! Was put in the engine did get spark once in 5 of 6 cylinders then nothing I've had thoughts of buying new packs for it and trying that it does...
  13. W

    1987 115 I 6 update lol!

    Hi everyone its been a while no boat since august 30th! Well any way the farthest the motor got done was the stator tested good a new cdi trigger coil was installed the motor had spark on 5 cylinders then lost it that's where I sit. My plan is to replace both switchboxes and check all my coils...
  14. W

    1987 115 I 6 update

    Well I finally put my boat in the shop the mechaniic found my stator was good but the trigger was bad are these hard to replace? Would this cause no spark on cylinders 1 3 5 6? 2 and 4 have good blue spark Its getting late I just want to FISH BASS! Thanks for any help my boats just sitting at...
  15. W

    1987 115 I 6 update

    Hello been working on my 115 i6 did a spark test could only get spark on #2 and #4 any ideas? Thanks
  16. W

    1987 115 I 6 update

    Hi guys I'm still working on my motor I did recheck my compression its still 120 top to #6120 so that's a relief! But still got the running starting trouble which is putting a big dent in my bass fishing this summer grrrrrrrr! Well I would like anymore I'd'ers from you guys I still have to check...
  17. W

    What now? 1987 115 I6

    Hello Had my boat out sunday night for a test run well it took forever and a day to get going I did reset float height etc checked plugs after the run and it seemed a couple were dry and the rest were wet and oiley when it was running when I opened it up seemed to not run on all cylinders but...
  18. W

    Hi does ayone know where I can get a corner cap for my 1987 starcraft pro bass 170

    Hi my pro bass is missing the back right corner one as you face the boat thanks.
  19. W

    1987 115 I-6 about had it with this boat anchor!

    Hello I have a 1987 6 cylinder 115 its hard starting I found a bad float the bottom water jacket was filled with sand I cleaned all that out and installed a new impeller the bad float was replaced along with a split front crank breather hose I need to know the corect starting method for this...
View older results
Top