Search results

  1. G

    Boat with paint cracks and hull damage

    @briangcc Thank you for the VW reference. That will come in handy. I bought a complete 2006 Toureg with the VR6 engine for $500, so I have everything I need to start. Call me crazy; I was born to do this kind of stuff, no matter how many naysayers I face.
  2. G

    Boat with paint cracks and hull damage

    @briangcc Thank you for your input. It is a 2004 boat, so colour matching is the least of my concerns. For now, I may fix the gel coat cracks and vinyl wrap the boat. It is a long-term project doing something unique.
  3. G

    Boat with paint cracks and hull damage

    I get where you are coming from. I have years of fabrication experience and have also worked as an automotive technician troubleshooting electrical issues. Wiring is easy for me. When doing all kinds of one-off projects, who cares about compliance? Compliance is for someone who wants to live by...
  4. G

    Boat with paint cracks and hull damage

    I bought a boat for cheap. It has what looks like paint cracks on the top part of the hull. I also found damage in the hull (bottom part). The engine was not winterized, and I bought it as a project. I will engine swap it with a Volkswagen VR6 engine to create a YouTube video series on how to do...
  5. G

    The engine stalled and no start while on the water

    Ok so the alarm would sound if the engine was overheating...correct? Same if the oil pressure was low...correct? I have the alarm system
  6. G

    The engine stalled and no start while on the water

    Does anyone know if the temperature sending units can disable the ignition system when say the engine overheats? Why does this 4.3 have two temperature sending units? Where can I get a wiring diagram for my boat?
  7. G

    The engine stalled and no start while on the water

    Correct it was turning over (cranking) but the engine would not start. It is not the kill switch. I tried turning it on and off. Unless the kill switch could be an intermittent issue. Before replacing the engine it has the thunderbolt ignition system (which did not work) but I replaced it with...
  8. G

    The engine stalled and no start while on the water

    Took my 1995 Bayliner boat with the 4.3 Vortec Mercruiser engine out on the water today and after a while of boating the engined stalled. It would not start again. Had a good samaritan tow me to shore. After loading the boat on the trailer and coming home the engine is starting again. While on...
  9. G

    Mercruiser exhaust bellow not staying on

    You mean drilling the holes into the exhaust below or where it goes on to?
  10. G

    Mercruiser exhaust bellow not staying on

    I have a 1995 Bayliner Mercruiser with a 4.3 engine. I replaced the engine last year. At the same time, I replaced the gimbal bearing, shift cable and bellows. Everything is working fine except for the exhaust below keeps on coming off the stern drive side. This will be the fourth time that I...
  11. G

    Installed 4.3 Vortec engine from Chevy S10 in a boat

    I'm here to share my experience now that my boat is working and on the water. I have seen several questions and discussions on this subject so I figure I would share my experience and with that will pose a question at the end of this post I bought a 1995 Bayliner boat with a non winterized...
  12. G

    Remove the dash and stearing wheel on Bayliner boat

    I have a 1995 Bayliner Capri 1860LS boat. My fuel gauge no longer works and needs to remove the dash to replace it. I did replace the temp gauge last year and manage to do that without removing the dash (was a pain to do) I found 4 screws but now need to somehow remove the steering wheel. I see...
  13. G

    Engine fitment from 1995 boat none vortec

    I have a boat 4.3 Vortec engine that I pulled from a 1995 Bayliner boat that I'm selling. I have someone interested in the engine and his boat is 1990 with the none Vortec engine. Will the 1995 4.3 Vortec engine fit in a 1990 boat with the none Vortec? I'm selling the complete engine with intake...
  14. G

    What is the purpose of Trim Sender

    I'm a first-time boat owner and doing repairs as I go along. After replacing the engine and gimbal bearing etc I have everything working. I had it out in the water last weekend. I also figured out (with the help from Youtube) how to adjust the trim limit since I had it all apart. What is the...
  15. G

    Winterizing and antifreeze to use in Mercruiser 4.3

    I'm in the process of winterizing my Mercruiser 4.3. I have drained the water from the exhaust manifolds and drained the engine block by removing the plugs near the bottom of the block. Is it still necessary to add antifreeze to the engine after draining it? If so can I use the same antifreeze...
  16. G

    Alarm sound stays on and wiring issue

    I have my 4.3 rebuild engine back in the boat (as per previous post with other issues) and running. I bought the boat with a none winterized cracked block engine that was seized up. So I don't know about any of the other conditions prior to me buying the boat because I never had it running...
  17. G

    Crack in Skeg

    I notice that while working on installing my Alpha 1 Gen 2 sterndrive that the skeg has a crack. What is the best way to fix this? I have a welder and can weld aluminum. I used to work as a welder (20 years ago) and I have never before welded aluminum so I would have to practice. My welding...
  18. G

    Alpha one Gen 2 Sterndrive lining up gimble bearing with engine coupler issues

    A little background. I bought a boat with a bad engine not winterized (I knew this before buying). I have another engine in and running. I also replaced the gimble bearing in the whole engine replacement process. The last remaining problem is that I can't get the gimble bearing to line up with...
  19. G

    Temperture gage not working

    Can someone tell me if my temperature gauge is not working if it stays up all the way? Or could it be my temperature sensors? It stays like this with the ignition on or off. Even with the battery disconnected, it stays like this
  20. G

    Issue with flooding on Weber Carburator

    I have the Weber Carburator as per this video https://www.youtube.com/watch?v=IN9-ov2P5wI I have problems with it flooding. I have completely rebuilt it and have done a proper adjustment on the floats. I'm thinking that I'm missing something but can't figure out what else to look for
Top