Search results

  1. 6

    No spark 55 HP Evinrude triumph 1969

    I went thru this very problem with my 1969 85hp evinrude last year! The info that Crosbyman gave you is top notch. Use it to get you to the point were you get a spark at the coil that will jump a 1/2"gap. Then i found was spark plug wires this old will need to be replaced due to leakage. I had...
  2. 6

    Add tilt and trim to 1969 85hp Evinrude?

    Are any other mid sections and transom mounts transferable to the 1969 engine? I looked at parts diagrams and don't see anything with tilt until the 1977 models
  3. 6

    Add tilt and trim to 1969 85hp Evinrude?

    I'm not interested that option
  4. 6

    Add tilt and trim to 1969 85hp Evinrude?

    Thanks for the reply! But thats not answering my question
  5. 6

    Add tilt and trim to 1969 85hp Evinrude?

    Is it possible to swap everything from engine pivot thru mounting bracket from a newer model to have tilt and trim? or at least tilt?
  6. 6

    Menards plywood

    I used Menards marine rated plywood in my transom rebuild. It was special order but reasonable priced compared to other sources
  7. 6

    Spark Plug suggestions!

    i got 4 ngk buhw plugs coming from Rock auto
  8. 6

    Spark Plug suggestions!

    My ebay purchase of the V40FF spark plugs fell through! Back to searching
  9. 6

    Spark Plug suggestions!

    I was able to purchase some AC V40FF on ebay! I will give them a try.
  10. 6

    Spark Plug suggestions!

    Is the V40FFK the same plug?
  11. 6

    Spark Plug suggestions!

    Do you have any experience with using those plugs? good or bad?
  12. 6

    Spark Plug suggestions!

    Thanks! Thats the answer i was looking for!
  13. 6

    Spark Plug suggestions!

    Was the surface fired plugs best for these engines?
  14. 6

    Spark Plug suggestions!

    I have 1969 85hp Evinrude, Model85993E. The original manual says champion L-19V. I'm looking for suggestions for something other then Champion. Something that others have had good luck with. I'm in Wi. with elevation of about 1000ft Above SL. This engine is just going to be used for running...
  15. 6

    1969--85hp Starflite, model 85993E possible carb swap?

    Did Evinrude ever sell a kit to redo the thermostats? Or is it done piece meal with just the individual parts? 1969 85hp 85993E
  16. 6

    1969--85hp Starflite, model 85993E possible carb swap?

    Well i got the 1977 set of carbs cleaned and installed! i had a chance to run the boat for about 30min today. It has never run this good. top end was good, mid range and idle perfect. I put NGK br7hs gapped at .030 in it. I think i need to quit fiddling with and just try to enjoy it before the...
  17. 6

    1969--85hp Starflite, model 85993E possible carb swap?

    Thanks! I always used ngk in other 2 stroke engines. I just wasn't sure about my older evinrude.
  18. 6

    1969--85hp Starflite, model 85993E possible carb swap?

    Would you stick with champion plugs or ngk?
  19. 6

    1969--85hp Starflite, model 85993E possible carb swap?

    Compressions are 120-120-115-118
  20. 6

    1969--85hp Starflite, model 85993E possible carb swap?

    The high temp light has never come on, but it hasn't been run long enough on the lake without one problem or another to really know. I plan on just using it for cruising around my lake. mostly mid range or idling during no wake periods
Top