Search results

  1. alldodge

    Which NMEA2000 gateway to use on a VP 4.3 GXi-E

    SN 4012137867 Using this serial number it comes up with more detailed info. ECM part number 3863326 Volvo Gateway
  2. alldodge

    VP 5.7 gsi - Temperature Rising

    The number isn't coming up at https://www.volvopenta.com/shop/0 Look in the pump housing with impeller removed and do you see any wear marks?
  3. alldodge

    Which NMEA2000 gateway to use on a VP 4.3 GXi-E

    Welcome Your serial number (tanks for providing) list part number 3858888 which is a MEFI but unsure if it's a 3 or 4 model. Either way you will need a gateway connection to use. MEFI's are not great with providing much data and if the gateway's that are available work, I'm unsure. Suggest...
  4. alldodge

    VP 5.7 gsi - Temperature Rising

    VP so you have a crank driven water pump, correct? Have a serial number? Are their any grooves on the wear plate or pump housing?
  5. alldodge

    Vapor Lock

    Agree, VL is not magic that just happens
  6. alldodge

    Fuel tank size

    Welcome Wake Boarding Mag list it at 40 gal
  7. alldodge

    Raw water pump

  8. alldodge

    Mercruiser MPI 5.0L w/ Bravo 3 outdrive not going into gear... lower shift cable is very hard to shift

    FunTimes has you covered pretty well The drive should shift easy with your hands holding lower shift cable and motor running on a trailer. Remove cable from shift plate, start motor and an easy push/pull will change it F/N/R
  9. alldodge

    Raw water pump

    Either the pump is defective or bolts/washers not installed correctly
  10. alldodge

    1972 mercruiser 120 hp

    One that fits on the drive We need type of boat, what prop is on it now, what is WOT rpm now
  11. alldodge

    Mercruiser alpha 1 gen 2 alarm sounding

    There is another temp switch other than the TKS one which causes the alarm to sound thru the ignition module
  12. alldodge

    connecting 2 batteries

    Suggest a Bus Bar https://www.bluesea.com/products/category/18/BusBars
  13. alldodge

    Stingray 180rx water leak

    Welcome Need to put a float switch on your bilge pump so it turns on automatically Other than putting water in the bilge (I wouldn't do that) to see if it leaks out your testing is good. Only way to find the leak is in the water. Might have something to do when water pressure builds while...
  14. alldodge

    Installing Bravo3 Sterndrive

    The drive shaft isn't making it into the coupler Does the alignment bar go in and out with 2 fingers, and does it go all the way in?
  15. alldodge

    In need of an ECU ‘94 Malibu Echelon

    OBD DIagnostics has a 861086T1 for 2K, but may also be able to repair yours Oh and a MEFI-1 can be reprogramed so might not need the exact part number
  16. alldodge

    engine shutdown

    Guess I should add if the distributor wasn't the EST model
  17. alldodge

    engine shutdown

    That distributor is not designed to be able to create a miss to unload the prop, the shift interruptor turns the dizzy OFF
  18. alldodge

    Tuning vortec 350 replacing old 260 Mercruiser

    Approx 30* total advance is normal Every 1 mph increase above max hull speed takes a lot of hp Get some slip numbers to find out what is on the table to use
  19. alldodge

    engine shutdown

    What is the motors serial number? What ignition system is installed?
  20. alldodge

    1988 Bravo 1 Shift Cone Issues

    The 1988 was the first Bravo and next to nothing can be used for it, or from it to later versions
Top