Search results

  1. B

    VP 5.7 GXI-j Setting Distributor T

    I am in the process of re-powering my engine. I have purchased a new VP GXI,320 hp long block and have some questions about distributor timing. I have installed the distributor and feel that I have it aligned properly with the engine in the #1 TDC position. I have read conflicting information...
  2. B

    Engine Swap questions 5.7GXI-J

    I`ve begun the process of swapping out my locked up 5.7 with a new long block 5.7. I will need to transfer some of the components from the bad engine over to the new block. In the process I am refurbishing/repainting some of the items as I go. Specifically regarding the sensors of the block...
  3. B

    5.7 GXI motor mount question

    I’m getting ready to pull my engine and have a couple questions as it pertains to the engine mounts. All wires, lines, cables and hoses have been disconnected. My question pertains to the front engine mounts. I tried loosening the large top nut with a crescent wrench but it just turned with...
  4. B

    VP 5.7gxi-j- rebuild or remanufactured block

    Unfortunately due to a series of unseen circumstances, I am in the need of a new engine block. I think my oil pump let go while at cruising speed. I need the forums advise on which direction to go. Do I have the existing block pulled and rebuilt or go the route of a reman long block swapping...
  5. B

    Separating Volvo upper and lower drive sections, DPS-A

    Need some advise. I'm trying to separate my DPS-A drive, upper and lower halves. I have removed the two bolts and four nuts as the manual instructs. I cannot get the two pieces apart. I have tried tapping with a rubber mallet and gingerly tried prying apart with a stiff putty knife to no avail...
  6. B

    Volvo Penta Fuel Cell Rebuild Video

    I just came across this Youtube video on how to rebuild the VP fuel cell`s. This guy says he will also rebuild for you for $200. For all of you guys having issues, you might want to reference...
  7. B

    Volvo Penta Gear ratio question

    What determines the gear ratio of an VP DPS-A outdrive? Is it the gearing in the upper housing or the lower housing? I may need to replace my upper and want to make sure I get the proper unit, 1.95.
  8. B

    DPS-A whining noise when in gear

    Splashed the boat for the first time this past weekend. Unfortunately I have a whining pitch when I put in gear. In neutral no noise, even when reved up.Gear shifting is smooth. The noise crescendo's as the speed increases and eventually is overcome by the engine noise. Reluctantly I ran it up...
  9. B

    Anode Replacement Question

    Replacing the Magnesium (fresh water) anode on my DPS-A outdrive this year. I have recently repainted the outdrive this off season. Do I need to sand down to bare metal, to allow metal to metal contact between the bottom of the anode and the aluminum drive housing?
  10. B

    Lower Unit Oil Question

    Needing to change my lower unit oil in the coming weeks. My DPS-A . I believe it calls for synthetic 75-90w, gl-5, non limited slip. Where I live it is difficult to find "non limited slip" oil. Is it safe to use synthetic limited slip of the same weight? What harm could be done by doing so.
  11. B

    Cheap fuel cells on Ebay

    What year and what engine unit are you dealing with? I was able to disassemble mine and clean it relatively easy. That being said it might be worth a chance. They appear to be rebuilt/refurbished units, not new Chinese manufactured.
  12. B

    VP Fuel Cell preventative maintance?

    I have an `08 VP GXI-J engine in my boat with about 350 hours on it. So far I have had no issues with the engine or fuel pump at all. I was thinking that while the boat is in winter storage that it might be a good time to take the fuel pump apart for a good internal cleaning and refurbishing. Am...
  13. B

    Water in outdrive oil, SX-A

    Pulled the drain plug yesterday on my SX-A outdrive yesterday as a part of my winterization process. Much to my dismay the oil came out, looking like a milkshake in color. The boat has been in the water all summer. Obviously water intruded sometime during that time. Now what? I have pulled the...
  14. B

    Understanding Volvo DP-S Propellers?

    My 26` Chaparral with the 5.7 320 HP engine and DPS-A outdrive is currently carrying F7 stainless props. According to specs my engine should redline at 5200 rpm. I am only able to achieve about 4500 rpm at WOT. If I want to get closer to the 5200 rpm figure, should I consider going to a smaller...
  15. B

    VSR-A/B switch issues

    In the process of installing the batteries into my `08 Chaparral 264 Sunesta, I inadvertently crossed polarity for a split second and now my A/B switch does not function in the Off position. My boat has two sets of dual batteries. Two for the engine compartment, starter and deep cycle. I...
  16. B

    Volvo SX-A trim sender questions

    My trim gauge quit working last year, boat is coming out of storage here in a couple weeks and I am contemplating replacing the unit before taking it to the lake. My research tells me part # 3841840 is the latest number for the replacement, selling for around $200. most places. I think I can do...
  17. B

    Found bottom blisters, now what?

    I kept my boat for the first time in the water, slipped for the first time this year. I really liked the convenience it allows rather than mess with the hassle of trailering and loading and loading at the public ramps each weekend. However, after completing my year end hull cleaning a couple...
  18. B

    Volvo Penta Online Store-still missing

    Does anybody know what`s up with the Volvo Penta online store. I relied heavily on that site for exploded parts illustrations and part numbers. Iboats even linked to it as a resource. For several months now every time I try to access I get the message-We'll be back soon. Well it`s been 5-6...
  19. B

    Cant Get All My Oil Out

    I`ve begun the process of winterization and have a problem. I have a `08 5.7 Gxi-j VP. I have attempted to draw my engine oil out of my pan after warming, but am only getting a couple quarts before I start pulling air and it just sputters. I have used two types of pumps a vacuum and a...
  20. B

    Outdrive water hose diameter

    I`ve got to make a temporary hose repair on my SX-A drive this weekend until I can get a part. Does anybody know what the diameter is of the cooling water hose that leads into the transom shield from the pivot housing. My water nipple broke off, going to try to insert a small section of pipe to...
Top