Search results

  1. kcassells

    Boat construction question for tank removal

    Ok I had the same problem, seems covers like that hatch type fail all the time. I put in a new deck without a hatch access. Just didn't want to do this again. Take accurate measurements for future use if occasion needs to access whole tank.
  2. kcassells

    Boat construction question for tank removal

    Just seems to me for a combustion opportunity. Ignition Protection - Electrical components must be ignition protected if they are in a compartment with a gasoline engine or fuel tank. Inspectors will look for proof in the form of labeling. If the component is not labeled, the inspector...
  3. kcassells

    Boat construction question for tank removal

    WTSUGAR. Happy motoring.
  4. kcassells

    Astroglass 1989 full rebuild

    1 vote from me!
  5. kcassells

    Evinrude Paint

    You don't need all that {etching primer} if you are just roughing up the surface to prep paint. That's for when you get to bare metal is all.
  6. kcassells

    1990 Bayliner 2651 resto

    Yup! Each layer is usually 2 -3 " past the former. That would be all that is needed.
  7. kcassells

    Astroglass 1989 full rebuild

    Did you splash her yet?
  8. kcassells

    Evinrude Paint

    LaqueRatt Just buy some close or not paint and have at it.
  9. kcassells

    1985 Bayliner 2750 Ciera Sunbridge Resto

    Ya know that is a great idea. I probably wouldn't waste my time or money unless I was doing ac. Da whole ding is a heat/cool loss. I don't believe you will have any real gains.
  10. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    I think for the rest I will order some foam for a backer and add that to the backer board first. Regarding adhering the panels to the walls my options are the tape above, velcro or these sink mounts with a cap screw. Place on walls with a dab of pb, install panel and cap nut or a pc. of trim...
  11. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Marine vinyl from the co. below. Great customer service and fast ship. My color is an offwhite. https://www.marinevinylfabric.com/products/perforated-holes-marine-vinyl-fabric-flexa?variant=39339193008212
  12. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Scott, you are the Best! Thanks for the heads up. I did lose count on Mick's projects. {plural} Early morning belly laugh. Good start to the day.
  13. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Ok let's see what's going on. last of the orifices showed up today. Swapped them out. Worked last couple days making templates, fitting and adding fabric. Back of fabrics is plastic board stuff, Ultra light. Used "Alien tape" for template adhesion. A 2 sided tape, 1" wide and double sided. Best...
  14. kcassells

    Cowl fiberglass resto

    Either way works. Go for it.
  15. kcassells

    Cowl fiberglass resto

    Nah...inside so cowl fits right back in and an easier face to sand/prep. imho.
  16. kcassells

    Cowl fiberglass resto

    Your going to have to remove all loose glass. Sorta like "scoop" it out. Put a pc of laminate, plastic, wood strip on the back inside to follow contour. Start to do glass work and build up to size. Sand, paint etcccc. You should put a pc. of plastic like a trash bag on the face of the template...
  17. kcassells

    Evinrude Paint

    Pics will never give us an accurate color. Ask someone local perhaps.
  18. kcassells

    1990 Bayliner 2651 resto

    Still playing with outboard tuning uppy thingy. Hopefully the last of parts get delivered tomorrow, #47 and #34 new jets/orifices. Replaced cracked carb yesterday and was gonna run it and "DUH" order double batch of 34 so another lost day. Did get goodies on board to start cuddy lipstick...
  19. kcassells

    Evinrude Paint

    Leaders rpm https://leadersrpmshop.com/johnson-evinrude-omc-new-oem-outboard-motor-spray-paint-dark-charcoal-0772049/
  20. kcassells

    1990 Bayliner 2651 resto

    Just sit back for a few minutes and enjoy your hard work! Looks great. Now get back to it.
Top