Search results

  1. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    So haven't stopped just been diddlin and ..... Used some of the pre-fabbed glass 1/8" sheets my neighbor gave me for leveling low spots. Seems to work pretty well. Started banging away at the access hatch. Gonna put a 1.5" lid on it at the end of the day for better access to batteries. Fitted...
  2. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    So I can only say about the benefits of the multi-tool. Ridgid/electric/no battery. The applications for boats are insane. First and formost the cutting, grinding and leveling with NO dust. In addition there are so many tool attachments for tough to get at spots. Accessories also include...
  3. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Got to the na na na part...cleanup;
  4. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Put down another qt. of wog rustoleum blend. Done with that. Peeled off tape. The raw spots are where I'm going to attempt to glass the bottom of the bilge deck to the stringers etc. @ 3 coats yesterday and 3 more today. Happy Fathers Day you ole' farts!
  5. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    zool and wog Zool that glass you recommended worked out great! Mike went back in and sanded my arse of for the last 2 days and threw down your rustoleum formula, 1 coat. Large area, got pretty buzzed. Will finish it off tomorrow. BTW....Sanding the first 2 coat rustoleum was like sanding steel!
  6. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    ​​​​​​​
  7. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Wrapping up the last of the penetrations in the splashwell area.
  8. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Got back in it and started danding off the dead edges of the glass work prior. Then just kept on sanding the craps that fall on the floor that I didn't scoop up at the times prior. Also sanded down the stringers to level for the splashwell. Sacking out got to gets to work tonight. Sanding really...
  9. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Well there's a scare and validation for the value of deck scuppers. Did the other side of the gunnel/liner. Darn happy how that 1700 rolled into the curves and undulations of the pb I placed yesterday. Cool here and rain seems immenient all the day. Using some heat lamps to pick up the pace. Wet...
  10. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    So yesterday when I got home in the morn...I grinded out the transom area where the old deck drains were. As I said real crappy no access area and the both were sealed with silicone to the liner. So here's a note to yap about. The liner comes on the insides hull. They are integral to the outside...
  11. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    So in regards to the transom, battery hatch and self bailing drains. The drains were concealed left and right behind the transom sides and in accessible. I'm going to move them out where I show them with alot of modifications. That being said then create a battery hatch that is elevated above...
  12. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    A little more squaring it up for fit.
  13. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    SCORE!! My neighbor had some left overs from work at hs country club and left them for me. Bunch of csm and glass sheets x 1/8". Thats great cause I have areas I can use it for shims and leveling.
  14. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    TGIF!! Got into the deck this morning after work, let's call it a dry run fit. Screwed down a bunch to feel it out. Not to bad. Still have a little trimming and fitting. I need to order some access floor panels. Might go stainless over pvc. We'll see. Did not do over the tank ply.
  15. kcassells

    Jon boat floor renovation

    Something like this? Pretty bad drawing but food for thought. All lower areas get foamed or storage in the raised deck area. You may need to add a lip of wood on inside perimeter for the new flor to rest on and the same in the raised areas. Try to put your bench on the stringers/bulkheads. Oh...
  16. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    So not too shabby... While still just a little wet I trimmed off the excess.
  17. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    I needed to build a platform to support the baitwell. Around 2" gap from keel stringer to base of baitwell. The other day I stood in it after doing some work and it bounces/flexes too much. I made some ply for the support. Wood gave me a suggestion to use to form the slight bevel corners. His...
  18. kcassells

    1974 Duo Vagabond 17' sterndrive Transom and stringers project

    I had to make a support for under my bait tank. I beveled down the edges using 1700 and EEEpppoxy. Still had issues with the turn. Will grind that out and fill with csm. Some it will work so hey...
  19. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Saned down the fairing this morning. Very happy with it. Now on to other things.
  20. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    So pics might be in order. The bait well has a spot that the wood is thin. I added some 1700 again. Also made a "toothe" to go under the existing deck glass and will allow me to add pb for a good adhesion. Also sanded down fishwell Epoxy and went back with fiairing compound for easier sanding...
Top